Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

complete nitrous newb

Thread Tools
 
Search this Thread
 
Old Jul 19, 2007 | 08:49 AM
  #1  
edwardswb's Avatar
Thread Starter
12 Second Club
iTrader: (6)
 
Joined: Jun 2004
Posts: 519
Likes: 0
From: Oklahoma
Default complete nitrous newb

I always said I'd never run nitrous. HA! I came across a NX wet kit that was too cheap to pass up. My car is a M6, full bolt on, TRex, stock 241s, Moser 9" with 4.11s. With me inside the car, it'll weigh about 3450. I haven't had a chance to run the car cam only yet, but what do you guys think it'll do if traction is there with a 150 shot?

Last edited by edwardswb; Jul 19, 2007 at 09:21 AM.
Reply
Old Jul 19, 2007 | 09:09 AM
  #2  
Ray@Nitrous Outlet
Guest
 
Posts: n/a
Default

150 should take at least 1-1.5 sec off your time....but the faster you are NA the less it will take off
Reply
Old Jul 19, 2007 | 10:27 AM
  #3  
snowbird88gta's Avatar
Teching In
 
Joined: Jul 2005
Posts: 19
Likes: 0
Default

Originally Posted by edwardswb
I always said I'd never run nitrous. HA! I came across a NX wet kit that was too cheap to pass up. My car is a M6, full bolt on, TRex, stock 241s, Moser 9" with 4.11s. With me inside the car, it'll weigh about 3450. I haven't had a chance to run the car cam only yet, but what do you guys think it'll do if traction is there with a 150 shot?
Start breaking things
Reply
Old Jul 19, 2007 | 10:25 PM
  #4  
edwardswb's Avatar
Thread Starter
12 Second Club
iTrader: (6)
 
Joined: Jun 2004
Posts: 519
Likes: 0
From: Oklahoma
Default

I think the car is ready for it, I'm not too worried about breaking. Many upgrades are lying in wait. My only goal is to go high 10s cam only, maybe bottom 10s on the juice on this setup and then I'm moving on to bigger things.
Reply




All times are GMT -5. The time now is 11:46 AM.