I have searched and only found several pics of single stage solenoid setups. Does anyone have any pics of their solenoid setup for a dual stage system? Preferably not ones where the solenoids are integrated into the fuel rail, rather they are seperate. I am having trouble coming up with an idea for my NX noids. I have four of the big ones and a single purge noid.

I just dont want it to look ghetto but still be secure.

Thanks guys and girls.

 

Ditto..... I've only seen pics of one dual stage setup, and that guy had A/C and Power Steering removed.

 

Well since you got nuthin so far, I will toss in a couple of pics in on mine, although its has the ghetto fuel rail look you don't want, and is Y body vice F body.

 

 

heres mine

[IMG][/IMG]

 

Here's mine, one wet, one dry

 

These are awesome. Thanks guys. I am going to mock something up on Friday. Your pics really help me out.

 

Here's some pic's of my setup.

 

Damn that is clean. Did you run that all yourself?

 

here is one of our Edelbrock set up

 

I'm in the process of adding a second kit(dry). Pretty small solenoids but it's only going to be a 50 maybe 75 shot. Waiting on lines to come in. There will be a -4an line going to a Y fitting then two -3an lines will go to the nozzles.

 

I installed the components and pre ran the wires, Vinny @ 860 Performance came up with the fuel noid position and hardlines, as well as wired up the window switch/relays etc, and installed a Wideband. The Black Fuel Noid was a special request and Nitrous Outlet came through on it (the red one looked a little out of place, and provides me with some spare parts just in case).

I got matching powder Nassua Blue powder coat Valve covers and calipers going on in Nov. Thinking about doing the fuel rail as well...LOL EDIT just ordered the Blue PC fuel rails...

The engraved plate on the TB and the Breather were done by me. Redline Motorsports put in my H/C in Aug.