mach1 nitrous install questions

Reply Subscribe

Thread Tools

Search this Thread

Oct 9, 2007 | 11:25 AM

02Vortech

Thread Starter

TECH Fanatic

iTrader: (4)

Joined: Nov 2005

Posts: 1,078

Likes: 0

mach1 nitrous install questions

sorry i havent been able to get any help from mustang communities. im putting a wet kit + window switch on an 04 mach1 and i got some questions-

THANKS FOR THE HELP IN ADVANCE!

need to know what wires to tap to get the rpm for the window switch.

also what wire can i tap under the dash to get the 12volt key'd ignition.

and also whats the best way to run wires through the fire wall.

Oct 9, 2007 | 07:10 PM

98silvertacrbn

TECH Apprentice

iTrader: (106)

Joined: Jun 2007

Posts: 367

Likes: 0

From: Eastland,Texas

I dont know but if you run a aftermarket tach on the newer mod motors you have to run a tach driver that maybe something to look into

Oct 11, 2007 | 02:19 AM

00formLs1

12 Second Club

Joined: Apr 2005

Posts: 800

Likes: 0

From: las cruces, new mexico

u can use a wire off one of the coils or get a tach driver.
we got the signal from a coil wire and ran the wires through the boot where the harrness is.

Reply Subscribe