Finally, 8.94 @ 150 mph.......
Yeah I think you certainly have a lot of wasted motion man. As much as I hate to say it! It is cool seeing a car carry the wheels that confidently without letting up. Been a while since I saw some cool wheelies like that. Your car is definately one of the cleanest put together cars Ive seen in a LONG TIME! Glad to see when people take pride in their cars and aren't just shooting for a number.
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
i have them, i just didnt have them intime for the race. lol
i dont want to put them in anyway, im going to do bars i think. welding them in will make my paint on my wheel wells look bad and we cant have that. lol
Thread Starter
TECH Resident
iTrader: (46)
Joined: Dec 2001
Posts: 821
Likes: 0
From: Some where in the Corn Fields of Illinois
I'll be out next year for sure and it WILL be figured out.
I have travel limiters set as tight as I can get them, 2.4 inches of suspension travel. The front shocks are also set on 12 clicks (full tight). I still pulled them up 3-4 feet on my last pass (9.0 pass). On the 8.94 pass the wheels came up about 1.5 feet or so, with only 40hp starting on the progressive unit. The pass when they came up 3-4 feet, I was launching with 120hp starting on the progressive.Yeah I think you certainly have a lot of wasted motion man. As much as I hate to say it! It is cool seeing a car carry the wheels that confidently without letting up. Been a while since I saw some cool wheelies like that. Your car is definately one of the cleanest put together cars Ive seen in a LONG TIME! Glad to see when people take pride in their cars and aren't just shooting for a number.
haha, us poor people buying big stuff 3 running 40" trailers. lol come on now.
i have them, i just didnt have them intime for the race. lol
i dont want to put them in anyway, im going to do bars i think. welding them in will make my paint on my wheel wells look bad and we cant have that. lol
i have them, i just didnt have them intime for the race. lol
i dont want to put them in anyway, im going to do bars i think. welding them in will make my paint on my wheel wells look bad and we cant have that. lol
Yeah yeah yeah
Yes I sold my other street car this spring and bought a 40' hallmark Edge trailer Ive learned my lesson before, build it right the first time.... It took 2 years to build this car, and it took longer cause I wanted the BS3, 4 stage dry sump, and all the "right" things. etc etc 
I will be doing wheelie bars this winter too. Just need to figure out who I will have make them.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Thread Starter
TECH Resident
iTrader: (46)
Joined: Dec 2001
Posts: 821
Likes: 0
From: Some where in the Corn Fields of Illinois
Here is another video that I made yesterday. It shows 3 of my passes from last saturday. I made couple of other ones but they were only test passes.
New video link Cordova 2007 license passes
New video link Cordova 2007 license passes
Thread Starter
TECH Resident
iTrader: (46)
Joined: Dec 2001
Posts: 821
Likes: 0
From: Some where in the Corn Fields of Illinois
Your 8.94 video plays fine on my computer but when I play your Cordova-MFBA video I get sound and a scrambled video. Could just be my computer though im using my old crappy computer with a old version of Windows Media Player since my good one took a dump.
Thread Starter
TECH Resident
iTrader: (46)
Joined: Dec 2001
Posts: 821
Likes: 0
From: Some where in the Corn Fields of Illinois
-Brian
yeah. I just downloaded Elecard MPEG-2 Decoder & Streaming Pack 3 from download.com. Its a trial, but it lets you view mpeg-2 formats in media player. Video works like a charm then!!! Nice vids dude! i was there to see the first 2 passes, but missed that last one there.