Nano ROCKS - 9.1 @150- x2
Thread Starter
Staging Lane
Joined: Nov 2006
Posts: 76
Likes: 0
From: Central Jersey
Nano ROCKS - 9.1 @150- x2 We ran a new best in our Cartek Ls1 1997 Corvette with major help from NANO,if you run spray its a must have item. 9.1 @150 twice. Thxs Tom at Nano-nitrous. can't wait for 8's
MUST HAVE .
MUST HAVE .
Last edited by streetvet; Nov 20, 2007 at 01:10 AM. Reason: Ted is really Tom sorry
Thread Starter
Staging Lane
Joined: Nov 2006
Posts: 76
Likes: 0
From: Central Jersey
1st plus No heater needed , if both bottles are filled , all you got to do is open the bottles and you ready.
and your pressure drops off, it just common sense, but not with NANO - NO drop off. no BS. IT RULES
pressure is key the whole way down the track
Last edited by streetvet; Nov 18, 2007 at 09:37 PM.
Thread Starter
Staging Lane
Joined: Nov 2006
Posts: 76
Likes: 0
From: Central Jersey
I use compressed air from the paintball store, you could use nitogen but no need.You could call it the push system or the fill system, because what your motor drinks out of the NOS bottle, the nano nitrous bottle fills the Nos bottle.....
is the glass half filled or half empty???? IT WORKS and so SIMPLE.
is the glass half filled or half empty???? IT WORKS and so SIMPLE.
Launching!
Joined: Dec 2005
Posts: 232
Likes: 0
From: nj, edison
does the nano also push out the gas n20 or just the liquid? and how did you verify that the press. did not drop? i know on my runs with m6, the 150 shot starts at 12afr in the begining of first and gradually drops each cosecutive gear, the afr graph looks like a downhill. love to get a flat line.
Trending Topics
Thread Starter
Staging Lane
Joined: Nov 2006
Posts: 76
Likes: 0
From: Central Jersey
does the nano also push out the gas n20 or just the liquid? and how did you verify that the press. did not drop? i know on my runs with m6, the 150 shot starts at 12afr in the begining of first and gradually drops each cosecutive gear, the afr graph looks like a downhill. love to get a flat line.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Joined: Nov 2001
Posts: 10,023
Likes: 6
From: LT1 land...the "409" of the 90s!
Nice runs!
One of the main reasons this was not used in the past is it was not legal in the Sanctioned bodies you would want to run it in
.
If you check above in the Stickys there are some nice write ups from years ago
Looks like it is time for you to jet up!
One of the main reasons this was not used in the past is it was not legal in the Sanctioned bodies you would want to run it in
.If you check above in the Stickys there are some nice write ups from years ago
Looks like it is time for you to jet up!
Launching!
Joined: Dec 2005
Posts: 232
Likes: 0
From: nj, edison
yeah, with the heater is just too slow to keep up during the run, and in the colder days the heater gets much worse. having 1000psi the whole run has to be a big advantage over the guy that doesn't. they ask so much money for it though! but i guess it's worth it.
Anyone have before and after results? I get the concept and think it will work, I just want to know what type of gains there have been out there. If only a .1 or .less, may not be worth the cost. They are not cheap.
Also, is there a way to build one on your own for much less cost? I would think so. Seams quite a lot for a bottle and a regulator.
Also, is there a way to build one on your own for much less cost? I would think so. Seams quite a lot for a bottle and a regulator.
Thread Starter
Staging Lane
Joined: Nov 2006
Posts: 76
Likes: 0
From: Central Jersey
just got in It makes your car consistent . Its a MUST.This is big guys. Back to back 9.1's , within a hour ,did not touch the car.Did nothing but check gauges . NO bs. You guys will thx me later
Thread Starter
Staging Lane
Joined: Nov 2006
Posts: 76
Likes: 0
From: Central Jersey
We have been selling quite a bit of the Nano systems. I see no reason why they would not inpove track times over a set up that is seeing bottle pressure drop on the top end.
You are beating on the door of a 8 second run.
Dave
You are beating on the door of a 8 second run.
Dave
Thread Starter
Staging Lane
Joined: Nov 2006
Posts: 76
Likes: 0
From: Central Jersey
Nos power guys
Thread Starter
Staging Lane
Joined: Nov 2006
Posts: 76
Likes: 0
From: Central Jersey
I dealt with Ted.
Last edited by streetvet; Nov 19, 2007 at 11:56 PM. Reason: Tom or Ted the man behind the phone, hes GREAT