There is a guy selling a zex wet kit that he has on his 96 lt1. He says it works on lt1/ls1 but when I look on the zex website they give two different part numbers so that makes me think that the lt1 kit won't work on and ls1. Can someone tell me if it will work on my ls1 or not.

Thanks for the help!

 

Whats the part # for the kit he is selling, but form my understanding is that Yes there are two different part #'s but the only thing that is different is the jetting.

Fuel Pressures
LS1 = 60PSI
LT1 = 45PSI

-Chris

 

He did say that it is the ls1/ls6 kit that he is running on his lt1. I PM'd the guy that he bought it from to verify that it is it. The part number is the 82026 from the zex site. It shows the ls1/ls6 kit. When i go and look at it, is there anyway to tell if it is the 82026? Will this part number be on the control box maybe?

 

Chris is correct. The only difference between those two kits is jetting. You can use the LT1 wet kit on the LS1.
Dave

 

IS there any difference in the TPS Voltage to worry about?

-Will

 

No. You will be fine.
Dave

 

Thanks for the replies!!