Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

power to rear wheels

Thread Tools
 
Search this Thread
 
Old Mar 28, 2008 | 02:46 PM
  #1  
b4c346's Avatar
Thread Starter
Launching!
 
Joined: Sep 2007
Posts: 268
Likes: 0
Default power to rear wheels

hi guys,just wondering when you guys say you are shooting a 75,100 or 150 shot,is that a rwhp shot.i'm thinking of putting in my 150 jets which is close to 125 rwhp.my 125 jets give me a 1 second in e.t now which my kit is not a rwhp kit.just wondering will a good stock pump handle 125 to the wheels.will be about405rwhp with the nitrous.car dynoed 282 rwhp na.thanks
Reply
Old Mar 28, 2008 | 03:34 PM
  #2  
TheBlurLS1's Avatar
That's what she said...
iTrader: (8)
 
Joined: Mar 2004
Posts: 7,954
Likes: 2
From: Nederland Texas
Default

Stock pump is fine for that much power, stock injectors are getting close to maxed if you're a dry kit, but you said jetS, so I'm assuming it's wet. Happy spraying!
Reply
Old Mar 28, 2008 | 04:47 PM
  #3  
b4c346's Avatar
Thread Starter
Launching!
 
Joined: Sep 2007
Posts: 268
Likes: 0
Default

thanks blur ls1.does anyone else ever question when someone says you'll be ok say with a 150 shot,are they talking 150 to the rear wheels ? some kits are to the rear wheels and some are not.just wondering if the nitrous companies are on the same page answering questions about what i'm talking about.thanks
Reply
Old Mar 28, 2008 | 05:13 PM
  #4  
Ray@Nitrous Outlet
Guest
 
Posts: n/a
Default

the stock pump is usually OK up to the 450whp range....some can go more and some less. It is always best to verify A/F ratio and that you are keeping constant fuel pressure throughout a run.
Reply
Old Mar 28, 2008 | 06:17 PM
  #5  
b4c346's Avatar
Thread Starter
Launching!
 
Joined: Sep 2007
Posts: 268
Likes: 0
Default

thanks ray,thats what i wanted to know!your the manalso my af ratio is 11.5 on the bottle with good fuel pressure on my electric fuel guage.
Reply




All times are GMT -5. The time now is 04:44 AM.