Stock bottom end, 200 shot , ran 9.91 today
I managed to get a 9.91 out of my car today . This is a 02 engine with LS6 heads and a futral F11 camshaft, LS6 intake 42 lbs injectors. Also using my NOS nozzle kit under each injector I had in my mustang. I am spraying a 200 shot for now.
My car is very light at a little over 3,000 with me in it. I am running a Deadenbear glide also.
I got a few questions for a 2 step and transbrake wiring. I will make another post
Thanks , pic attached of my car

My car is very light at a little over 3,000 with me in it. I am running a Deadenbear glide also.
I got a few questions for a 2 step and transbrake wiring. I will make another post
Thanks , pic attached of my car

Trending Topics
Thanks for the compliments.
My 60 ft was a 1.42.
I held my rpms with the throttle and when I released the transbrake button had to mat it to the floor for the NOS to activate. In my video it had a stumble since I had to mat it. I plan to get my 2 step and trans brake working together so the pedal is on the floor and the NOS is activated right away . I think I will have high 1.30 60ft's.
I am putting in a COAN converter as it was blowing through the converter and the 4.30 gears are being removed for 3.73's. I had to let off at the 1000 ft. Anyone need any 4.30's for a 9" rear ? There almost new with 2 track passes on them and maybe 10 street miles.
My 60 ft was a 1.42.
I held my rpms with the throttle and when I released the transbrake button had to mat it to the floor for the NOS to activate. In my video it had a stumble since I had to mat it. I plan to get my 2 step and trans brake working together so the pedal is on the floor and the NOS is activated right away . I think I will have high 1.30 60ft's.
I am putting in a COAN converter as it was blowing through the converter and the 4.30 gears are being removed for 3.73's. I had to let off at the 1000 ft. Anyone need any 4.30's for a 9" rear ? There almost new with 2 track passes on them and maybe 10 street miles.


