Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

Would you spray?

Old Apr 21, 2008 | 04:33 PM
  #1  
RealLiveMD's Avatar
Thread Starter
TECH Enthusiast
20 Year Member
iTrader: (1)
 
Joined: Mar 2005
Posts: 552
Likes: 0
Default Would you spray?

I posted this on another site, but just trying to get all the feedback I can.

I have one of the weaker HC combo making about 400rwhp 375tq. All the mechanics say that my cheatr cam 214/230 .601/.575 117 LSA would love nitrous. They're figuring a 125 shot should easily put me over 525rwhp, 500tq. I mostly just like to punch it from time to time on the street. Would you spray? I've read the sticky and I know that most people around here run 125 shots on stock motors with no problems, but I'm not sure if it's somehow more stress on the motor since I already have 400rwhp. Yes, I'm a noob to nitrous
Reply
Old Apr 21, 2008 | 04:56 PM
  #2  
5_02ls1's Avatar
11 Second Club
iTrader: (20)
 
Joined: Oct 2006
Posts: 3,131
Likes: 0
From: Virginia
Default

125 is for sissys go 200 haha......

j/k just make sure the a/f ratio is good and you will be fine
Reply
Old Apr 21, 2008 | 05:16 PM
  #3  
1969mach1's Avatar
TECH Regular
 
Joined: Jan 2008
Posts: 458
Likes: 0
From: Bellaire, TX
Default

spray away!!!!!
Reply
Old Apr 21, 2008 | 05:24 PM
  #4  
stainless40cal's Avatar
Banned
 
Joined: Mar 2007
Posts: 257
Likes: 0
Default

150 would even be fine man just spray away and watch the a/f
Reply
Old Apr 23, 2008 | 02:03 PM
  #5  
RealLiveMD's Avatar
Thread Starter
TECH Enthusiast
20 Year Member
iTrader: (1)
 
Joined: Mar 2005
Posts: 552
Likes: 0
Default

I guess I should have asked the following: " Would spraying a 125 shot on a car with 400rwhp be roughly the same as spraying a 200 shot on a bolt on car...from the standpoint of stress on the engine?"
Reply
Old Apr 23, 2008 | 02:06 PM
  #6  
RealLiveMD's Avatar
Thread Starter
TECH Enthusiast
20 Year Member
iTrader: (1)
 
Joined: Mar 2005
Posts: 552
Likes: 0
Default

I guess I should have asked the following: "Would spraying a 125 shot on a car with 400RWHP produce the same amount of stress on the stock bottom end as spraying a car with roughly 325 hp with a 200 shot? It produces roughly the same hp and torque, but I'd be more afraid of the second scenario.
Reply
Old Apr 23, 2008 | 02:15 PM
  #7  
mpaige22's Avatar
Teching In
 
Joined: Apr 2008
Posts: 18
Likes: 0
From: California
Default

Ultimately it comes down to you "spraying responsibly"......if there is a such thing. Make sure you don't leave out any saftey equiptment/features for the system and find a reliable shop for your tune and the rest should be fine. Either way you look at it you will be getting GOBS of power at the flip of a switch so to speak. Just don't allow constant impulse to get the best of you and you should be ok. IMO. Good luck.
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 12:22 PM.