Nitro Dave's Plate Kit Installed
Nitro Dave's Plate Kit Installed Just your basic kit..... I tried best I could to do it as economical as possible. 1) Bought the bottle from someone local (New but 1/2 the price)
2) Bought the plate lightly used (Good as new but again 1/2 the price)
3) Bought the rest of the kit (brand X) from Nitro Daves (minus bottle)
Just wanted to post this up as an idea for an inexpensive way to do a nice little plate kit and here are the pics for install ideas.
Tucked the solenoids up under the cowl
2) Bought the plate lightly used (Good as new but again 1/2 the price)
3) Bought the rest of the kit (brand X) from Nitro Daves (minus bottle)
Just wanted to post this up as an idea for an inexpensive way to do a nice little plate kit and here are the pics for install ideas.
Tucked the solenoids up under the cowl
???? Hell I dunno? That's just the two lines that nitrous outlet includes with the kit? The one from the rail back to the solenoid (which is under the cowl), and then the other goes from the solenoid up to the plate.
So I guess you guys are saying that Nitro Dave's has been selling kits with dangerously long fuel lines? I trust that those guys know what works better than most, I guess I'll find out!
Any lean spike with those 24" lines probably won't be enough to make a ****, or else nitrous outlet would have changed them. The fuel line is -3an usually, less volume than the -4 nitrous line. I wouldn't worry about it at all. 
That is a REALLY clean setup, I like the way you have the lines run to the plate.
That is a REALLY clean setup, I like the way you have the lines run to the plate.
Trending Topics
Any lean spike with those 24" lines probably won't be enough to make a ****, or else nitrous outlet would have changed them. The fuel line is -3an usually, less volume than the -4 nitrous line. I wouldn't worry about it at all.
That's pretty much what I was thinking....those guys have forgotten more about nitrous stuff than I'll probably ever know.
That is a REALLY clean setup, I like the way you have the lines run to the plate.
Thanks...that was the goal, clean and cheap!
That's pretty much what I was thinking....those guys have forgotten more about nitrous stuff than I'll probably ever know.
That is a REALLY clean setup, I like the way you have the lines run to the plate.
Thanks...that was the goal, clean and cheap!
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo
Install looks good. Please send your pictures in for our customer page.
http://www.nitrousoutlet.com/customerCars/help.asp
The hoses that come in our systems are 2ft long. Our plate does not have the flow issues that some other companies have. For this reason our system works well with the 2 ft hoses on both the fuel and nitrous. On some cercumstance there has been issues of lean spikes which can be tuned out by shortning the lenght on the fuel hose. However 9 out of 10 cars will not see this issue...
Dave
http://www.nitrousoutlet.com/customerCars/help.asp
The hoses that come in our systems are 2ft long. Our plate does not have the flow issues that some other companies have. For this reason our system works well with the 2 ft hoses on both the fuel and nitrous. On some cercumstance there has been issues of lean spikes which can be tuned out by shortning the lenght on the fuel hose. However 9 out of 10 cars will not see this issue...
Dave
