Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

bottle question

Old May 9, 2008 | 07:53 PM
  #1  
SSPerformance's Avatar
Thread Starter
8 Second Club
20 Year Member
iTrader: (76)
 
Joined: Jun 2004
Posts: 2,902
Likes: 0
From: Goshen NY
Default bottle question

how many passes can i run on a 250 shot on a 10# bottle
Reply
Old May 10, 2008 | 04:45 AM
  #2  
JL ws-6's Avatar
Race your car!
20 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (50)
 
Joined: Mar 2004
Posts: 15,421
Likes: 18
Default

Make a run and weigh it. A full bottle weigh's 24 lbs for a referance, and I would try not to run it down lower then 2 to 3 lbs for consistancey, so if you're going thru less then 4 lbs a run you can get 2 solid runs in before you need to change it.


With a 250 shot, I am gonna guess and say you are burning thru about 2 to 2.5 lbs a run, so you "should" be able to get 3 runs out of a bottle depending on wether it was really full or not to start, and how much you purge off each run.
Reply
Old May 10, 2008 | 11:03 AM
  #3  
Robert56's Avatar
TECH Senior Member
iTrader: (2)
 
Joined: Aug 2003
Posts: 9,557
Likes: 1
From: Tacoma, WA
Default

Me too, a couple runs. 1lb per 15 seconds @ 100hp shot, so a 250hp shot would take about 1.75lbs per 10.5sec run. If I had your ET I could narrow it, but an exact number, it ain't gonna happen, to many variables.
Robert
Reply
Old May 10, 2008 | 01:11 PM
  #4  
JL ws-6's Avatar
Race your car!
20 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (50)
 
Joined: Mar 2004
Posts: 15,421
Likes: 18
Default

o.k., how about a 150 shot and a 9.5 second run?
Reply
Old May 10, 2008 | 05:31 PM
  #5  
SSPerformance's Avatar
Thread Starter
8 Second Club
20 Year Member
iTrader: (76)
 
Joined: Jun 2004
Posts: 2,902
Likes: 0
From: Goshen NY
Default

ran 9.50 on a 150 with 800 bottle presure bumping the shot up to 250
Reply
Old May 13, 2008 | 08:00 PM
  #6  
Red Heartbeat's Avatar
TECH Apprentice
iTrader: (9)
 
Joined: Mar 2004
Posts: 343
Likes: 0
From: Denton, Texas
Default

I was told you'll use 1 pound of nitrous every 10 seconds for every 100HP you're spraying.
Reply
Old May 13, 2008 | 08:14 PM
  #7  
robsquikz28's Avatar
TECH Veteran
iTrader: (246)
 
Joined: Mar 2008
Posts: 4,984
Likes: 1
From: Chicago/Crown point
Default

well my shop owner is spraying 300 and he only does 3 passes any after that we notice a dramatic drop in e.t
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 02:23 AM.