Bogg right at activation????????????????????

Reply Subscribe

Thread Tools

Search this Thread

Jun 26, 2008 | 01:41 AM

pontiac_boy

Thread Starter

Staging Lane

iTrader: (1)

Joined: Apr 2006

Posts: 99

Likes: 0

From: Charleston SC

Bogg right at activation????????????????????

I have a wide open tswitch and as soon as its activated the car boggs for about half a second then goes like its never done before. any idea what that could be?

Jun 26, 2008 | 02:37 AM

Nitro Dave's Nitrous Outlet

FormerVendor

iTrader: (25)

Joined: Jun 2002

Posts: 12,283

Likes: 4

From: Waco, TX

What is the fuel pressure and airfuel doing?

Jun 26, 2008 | 05:03 PM

GT Griller

12 Second Club

iTrader: (8)

Joined: Oct 2004

Posts: 1,689

Likes: 0

From: Hereford,Lubbock

Do u purge before u spray?

Jun 26, 2008 | 06:00 PM

cbra-klla

TECH Enthusiast

iTrader: (52)

Joined: Jun 2007

Posts: 523

Likes: 0

From: Summersville, WV

i'm voting no purge!!

Jun 26, 2008 | 08:06 PM

ShiznityZ28

TECH Addict

iTrader: (11)

Joined: May 2002

Posts: 2,554

Likes: 1

From: GB MD

Either fuels beeting the ntrous to the valve or the timings comming out before either get there.

Jun 26, 2008 | 08:31 PM

jmill96Z

10 Second Club

iTrader: (3)

Joined: Feb 2006

Posts: 2,554

Likes: 1

From: Movin' On Up

Any way the OP can post a picture of his setup? Could be a ton of things. Maybe his feed line is a mile long and the fuel is beating it to the nozzle, could be no purge etc.

Jun 26, 2008 | 09:57 PM

pontiac_boy

Thread Starter

Staging Lane

iTrader: (1)

Joined: Apr 2006

Posts: 99

Likes: 0

From: Charleston SC

I just finished the install and tried it to see if it worked. Im taking the car in to get a tune this weeknd. It feels to me like its getting to much gas at first. I do not have a purge however i tested it by activating the nitrous at 3000 rpms then shut it off at 5800. then slowed down and tried again. I ordered a wideband the same time i ordered the nitrous and still have yet to see it. Im pretty new to the whole nitrous thing if you cant tell already so any help would be great.

Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph

Verdad Gallardo

Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked

Pouria Savadkouei

Top 10 Most Powerful Chevy Trucks Ever Made!

Hennessey's New Supercharged Silverado ZR2 Has 700 HP

Verdad Gallardo

Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes

Verdad Gallardo

Awesome K5 Blazer Restomod Comes With C7 Corvette Power

Verdad Gallardo

10 Camaros You Should Never Buy

10 LS Engine Myths That Refuse to Die

Verdad Gallardo

Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0

Brett Foote

10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever

Verdad Gallardo

Jun 27, 2008 | 07:54 PM

Randy WS6

TECH Addict

iTrader: (69)

Joined: Oct 2002

Posts: 2,755

Likes: 2

From: Baxter,KY.

Use a scan tool and see how much timing is being pulled at time of the bog, and see if your going rich, you might need to purge or relocate the noids closer to the nozzle and equal length line from the noids to the nozzles

Jun 28, 2008 | 11:08 AM

#10

smokeum99ta

9 Second Club

iTrader: (15)

Joined: Jan 2005

Posts: 1,063

Likes: 0

From: waldorf,md

Is this a nozzle kit? The nozzle could be facing the wrong way making it act like that. Ask me how I know

(actually let friend install that piece and I never checked it out awhile back).

Jun 28, 2008 | 12:45 PM

#11

1LastTime 69

Banned

Joined: May 2008

Posts: 48

Likes: 0

wat n20 size? and fuel size? pump up the fuel

i have the same problem. hook up a manual guage to ur rail, and check it chances are if u ahve the stock pump thats it.
if u have a wet kit YOUR N20 LINE NEEDS TO BE TWICE AS LONG AS UR FUEL LINE!!!!!!!