07 Trailblazer SS Wet Kit Install
Thread Starter
Staging Lane
Joined: Mar 2002
Posts: 74
Likes: 3
From: Perry Hall, MD USA
07 Trailblazer SS Wet Kit Install Just finished up installing a Hidden Wet Kit in a friends TBSS and figured I would share some pics. NX Wet kit w/ dynotune 1stage RPM/WOT switch, Harris Speedworks TB Plate and some other goodies bottle heater,blanket etc...
With Cover On you cannot see anything!
All solenoids mounted & wired up
Throttle Body Plate-Very nice piece!
Bottle mounted to rear compartment cover
Bottle Heater all wired in and on bottle.
Bottle blanket attached.
All switches are hidden in center console(Left to Right-Purge,Activation,Bottle Heater) Bag of Jets in bottom
Dynotune 1 stage RPM & WOT activation switch! Another nice Piece!
With Cover On you cannot see anything!
All solenoids mounted & wired up
Throttle Body Plate-Very nice piece!
Bottle mounted to rear compartment cover
Bottle Heater all wired in and on bottle.
Bottle blanket attached.
All switches are hidden in center console(Left to Right-Purge,Activation,Bottle Heater) Bag of Jets in bottom
Dynotune 1 stage RPM & WOT activation switch! Another nice Piece!
Last edited by 02NavyBlueZ; Jul 19, 2008 at 08:34 AM.
Thread Starter
Staging Lane
Joined: Mar 2002
Posts: 74
Likes: 3
From: Perry Hall, MD USA
Thanks, I can't stand looking under a hood and seeing wiring nightmares and wiring thats not split-loomed. I prefer the OEM factory look. Every wire in the engine bay has been dressed with oem style split loom.
I am hoping for about 2-3 days for the install. I have to do plugs, mount all of the stuff, then wire up everything.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo Thread Starter
Staging Lane
Joined: Mar 2002
Posts: 74
Likes: 3
From: Perry Hall, MD USA
That is pretty bad ***. Now you need to get a remote bottle opener and stuff the bottle in the spare tire holder. If it would fit. Keep it all covert.
What jets are you starting off with, and what do wnat to be able to run? How much did all of hte nitrous stuff run you? Looks like 10lb bottle?
What jets are you starting off with, and what do wnat to be able to run? How much did all of hte nitrous stuff run you? Looks like 10lb bottle?
Thread Starter
Staging Lane
Joined: Mar 2002
Posts: 74
Likes: 3
From: Perry Hall, MD USA
This was not on my vehicle so i'll let the owner chime in with what shot he will be running and his expectations. As far as bottle fitting in the compartment thats a negative. Thats where the amp is installed for the subs, I don't think it would fit in there even if the amp wasn't there anyway its pretty shallow. spare tire is underneath truck.
2004, body, disconnect, hidden, installation, kit, nitrous, plate, spare, ss, throttle, tire, traiblazer, trailblazer, wire
