Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

Need help installing a NX direct port

Thread Tools
 
Search this Thread
 
Old Aug 1, 2008 | 12:34 PM
  #1  
black98supervette's Avatar
Thread Starter
Staging Lane
iTrader: (2)
 
Joined: Sep 2006
Posts: 68
Likes: 0
From: Tulsa, Oklahoma
Cool Need help installing a NX direct port

I just got a NXL direct port system today for my 98 corvette. I was laying out the system to see where everything would go when I noticed that the fuel rails only have one fuel line input. My 98 has a fuel line and a return fuel line. I am not sure if I can just bypass the return line and just run the fuel line or what to do. Just wondered if anyone had run into this problem before or has any ideas on the situation. Any help would be greatly appreciated.

Also If anyone else has this kit I would like to know how they like it.

Thanks!

Last edited by black98supervette; Aug 1, 2008 at 01:44 PM.
Reply
Old Aug 1, 2008 | 01:08 PM
  #2  
Nitro Dave's Nitrous Outlet's Avatar
FormerVendor
iTrader: (25)
 
Joined: Jun 2002
Posts: 12,283
Likes: 4
From: Waco, TX
Default

Sounds like you have the NXL system. If so you need to buy a after market fuel pressure regulater and you are going to need some hoses stc.
Dave
Reply
Old Aug 1, 2008 | 01:44 PM
  #3  
black98supervette's Avatar
Thread Starter
Staging Lane
iTrader: (2)
 
Joined: Sep 2006
Posts: 68
Likes: 0
From: Tulsa, Oklahoma
Default

Originally Posted by Nitro Dave's Nitrous Outlet
Sounds like you have the NXL system. If so you need to buy a after market fuel pressure regulater and you are going to need some hoses stc.
Dave
Yes, that's what I have. Do you know what type of regulator and how to get them to match up to my stock lines?
Reply




All times are GMT -5. The time now is 05:45 AM.