Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

Pretty Much Joined The Nitrous Club!!!

Old Aug 1, 2008 | 10:06 PM
  #1  
Trav's_TransAm's Avatar
Thread Starter
Staging Lane
iTrader: (5)
 
Joined: Nov 2007
Posts: 96
Likes: 0
From: maple valley, wa
Default Pretty Much Joined The Nitrous Club!!!

Well I finally decided to get some nitrous. Just ordered the HSW Sudden Impact Single Nozzle kit. Im on a budget so I will be piecing together my kit a little at a time. Hopefully I will have everything I need within a month maybe a month and a half. Im a nitrous newb but I have been doing research on nitrous the past couple of weeks. Lucky for me there is a ridiculous amount of info on this site. Im sure I will still be asking alot of questions in the coming days/weeks. All suggestions and advice welcome.
Reply
Old Aug 1, 2008 | 10:43 PM
  #2  
landonew's Avatar
TECH Fanatic
 
Joined: Nov 2004
Posts: 1,251
Likes: 0
From: Tuscaloosa, AL.
Default

Advice... Well, don't skimp on the safety stuff. FPSS, window switch (maybe not as important for an A4), WOT switch, ext.

Oh, and I would recommend a small shot until you can get a tune for the nitrous. Is best to adjust your A/F.
Reply
Old Aug 1, 2008 | 10:52 PM
  #3  
kdavis's Avatar
11 Second Club
15 Year Member
iTrader: (14)
 
Joined: Jun 2007
Posts: 840
Likes: 1
From: Encinal/Kingsville, Texas
Default

welcome. I have the same kit and I am more than pleased.
Reply
Old Aug 1, 2008 | 10:55 PM
  #4  
fox16's Avatar
On The Tree
15 Year Member
iTrader: (-2)
 
Joined: Jun 2007
Posts: 130
Likes: 0
From: Spring, TX
Default

nitrous the equalizer lol
Reply
Old Aug 1, 2008 | 11:09 PM
  #5  
Trav's_TransAm's Avatar
Thread Starter
Staging Lane
iTrader: (5)
 
Joined: Nov 2007
Posts: 96
Likes: 0
From: maple valley, wa
Default

Originally Posted by landonew
Advice... Well, don't skimp on the safety stuff. FPSS, window switch (maybe not as important for an A4), WOT switch, ext.

Oh, and I would recommend a small shot until you can get a tune for the nitrous. Is best to adjust your A/F.
Definatey! Thats why i'm pretty much piecing my kit together cause i cant afford all of it at once. I'm not gonna use it till i have it tuned.

Originally Posted by fox16
nitrous the equalizer lol
Well i'm not telling any of my car buddies im getting it.
Reply
Old Aug 2, 2008 | 05:57 AM
  #6  
Randy WS6's Avatar
TECH Addict
iTrader: (69)
 
Joined: Oct 2002
Posts: 2,755
Likes: 2
From: Baxter,KY.
Default

Just treat it with respect don't do any kind of short cuts, make shore you place the noids in the right places and use a jet chart and definitely use a purge on a wet kit ,and maintain fuel pressure , Don't engage the nitrous if your nitrous pressure is out of bounds with the manufacture specs ,And use gauges to watch your pressures, use a filter on the nitrous to keep from hanging a noid open ,But the main thing i keep my eyes on is the nitrous & fuel pressures, This is were every thing can become a problem, If your pressures are mismatched is like having the wrong jets. And make shore you timing is set to the manufactures specs ,use the right spark plugs Do not use the factory plugs.
Reply
Old Aug 2, 2008 | 08:11 AM
  #7  
Omega Doom's Avatar
TECH Fanatic
15 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (2)
 
Joined: Dec 2006
Posts: 1,532
Likes: 18
From: DFW,TX
Default

I'm also thinking about this kit? any results?
Reply
Old Aug 2, 2008 | 08:23 AM
  #8  
Mike@HSW's Avatar
FormerVendor
iTrader: (6)
 
Joined: Nov 2007
Posts: 1,593
Likes: 0
From: Glenolden, PA
Default

I know its tough, but like i said in our pm's just take your time and have patience until you can complete the kit. I think you will be very happy with the quality of the kit. Since your not gonna be spraying for awhile you should take your time and do a really nice and clean install.
Reply
Old Aug 2, 2008 | 10:33 AM
  #9  
35th SS's Avatar
TECH Addict
iTrader: (2)
 
Joined: Dec 2001
Posts: 2,622
Likes: 1
From: Hawaii track track.
Default

and remember to change that stock intank fuel pump for an aftermarket one.good luck.
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 07:06 PM.