2 Stage Dry Plate?
Thanks Robert... I really appreciate you badmouthing the guy, that has brought more to this Nitrous forum than any other sponsor or member, in my thread- He came here and answered the question I had-
I also now know all I need to about the interface... you have taken it upon yourself to pimp it to no end
I also now know all I need to about the interface... you have taken it upon yourself to pimp it to no end
on this board
Look guys. I in no way bad mouthed anyones product or anyone in this thread. I am intitled to my opinion and if I do not care for a product or a way of doing something I have the right to say so.. Expecially if it is being used with one of my products.
Thanks
Dave
Thanks
Dave
Thanks Robert... I really appreciate you badmouthing the guy, that has brought more to this Nitrous forum than any other sponsor or member, in my thread- He came here and answered the question I had-
I also now know all I need to about the interface... you have taken it upon yourself to pimp it to no end
I also now know all I need to about the interface... you have taken it upon yourself to pimp it to no end
Robert
You guys need to pull your heads out, and take a breath- you kill many more brain cells and its all over.
This thread was about one of Dave's products. NOT THE GOD &^&# INTERFACE-
This thread was about one of Dave's products. NOT THE GOD &^&# INTERFACE-
You even asked a question about the interface being able to work with a two stage. Im not attacking you in anyway, im was just wondering where you wanted this to go. You commented as to why you wouldnt want to run the interface, i offered some advice, which i hope lended some insight for you.
Yes you can spray a dry two stage through a wet plate, you would need the interface to do this so its part of the equation. Its obviously relavent to the question. If you have a question about his products and are not interested in other products, why not just call him directly? If you want daves plate thats perfectly fine, but you need the interface to fuel it.
Yes this idea involved using the interface for my big hit-
I also commented that I didnt want to use the interface on a different plan, running dry pre-Maf and a Wet for the big hit-
To use the interface for what I want to do now would require a push system to keep pressure up. If I am Hot lapping 1/4+ street passes, pressure drop is an issue. I would prefer a lighter hit to a pig rich scenario any day- I wont be hot lapping the big shot
I also commented that I didnt want to use the interface on a different plan, running dry pre-Maf and a Wet for the big hit-
To use the interface for what I want to do now would require a push system to keep pressure up. If I am Hot lapping 1/4+ street passes, pressure drop is an issue. I would prefer a lighter hit to a pig rich scenario any day- I wont be hot lapping the big shot
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Yes this idea involved using the interface for my big hit-
I also commented that I didnt want to use the interface on a different plan, running dry pre-Maf and a Wet for the big hit-
To use the interface for what I want to do now would require a push system to keep pressure up. If I am Hot lapping 1/4+ street passes, pressure drop is an issue. I would prefer a lighter hit to a pig rich scenario any day- I wont be hot lapping the big shot
I also commented that I didnt want to use the interface on a different plan, running dry pre-Maf and a Wet for the big hit-
To use the interface for what I want to do now would require a push system to keep pressure up. If I am Hot lapping 1/4+ street passes, pressure drop is an issue. I would prefer a lighter hit to a pig rich scenario any day- I wont be hot lapping the big shot
I dont agree about the push system, but i respect your position, the interface isnt for everyone. Im not trying to sell you one, i was just letting you know that is what you need to run the dry plate.
I have the nitro daves plate. Single stage wet. In the future I want to do a dual stage dry. When I bought the plate I asked them about using it as a dual stage dry. They said it would work fine. I believe there was a video of testing the plate off of a car. I think they sprayed nitrous thru both sides of the plate. I see a dual stage dry big injectors and a interface in my future at some point.
I have the nitro daves plate. Single stage wet. In the future I want to do a dual stage dry. When I bought the plate I asked them about using it as a dual stage dry. They said it would work fine. I believe there was a video of testing the plate off of a car. I think they sprayed nitrous thru both sides of the plate. I see a dual stage dry big injectors and a interface in my future at some point.
Nick
