Advice on settings for my Microedge.
Advice on settings for my Microedge. Well, just about got everything buttoned up on the Microedge install, and was curious how I should set it up. I mean like what rpm to start spraying at and what rpm to have it shut off at. I mean any little details as I am new to the nitrous game. Just let me know as I am getting the car tuned Thursday. I also have a slight traction problem even with the drag radials so should I lock out first gear or what. My mods are in sig. let me know your opinions thanks.
depending on what you can accually stall the car to, Id set the on around there, off will depend on what your trans shifts at. Id set a delay in before locking 1st out all the way.
heres my settings
On-3200RPMs
Off- 6200RPMs
No delays or lock outs. slight bit more traction
trigger is set at .48 I think
Remember if your getting traction issues at all, try delays, 1/10s of a seconds will make a world of difference.
heres my settings
On-3200RPMs
Off- 6200RPMs
No delays or lock outs. slight bit more traction
trigger is set at .48 I think
Remember if your getting traction issues at all, try delays, 1/10s of a seconds will make a world of difference.
