I'm back!!!!
Thread Starter
Teching In
Joined: Aug 2012
Posts: 10
Likes: 0
From: Woodinville, WA
I'm back!!!! Hey guys!!! Long time no see!!!
I used to be on here back in the day - known as LT1Factor - I had a white '94 Z28, C6 wheels, Ellis did a ton of work on it.
Well now I'm back. I picked up an '02 SS M6 w/ 30k miles a little bit ago.
Anyways, just wanted to say what's up! I'm looking forward to getting back into this scene!
I used to be on here back in the day - known as LT1Factor - I had a white '94 Z28, C6 wheels, Ellis did a ton of work on it.
Well now I'm back. I picked up an '02 SS M6 w/ 30k miles a little bit ago.
Anyways, just wanted to say what's up! I'm looking forward to getting back into this scene!
On The Tree
Joined: Feb 2012
Posts: 104
Likes: 0
From: Portland Area
^^ I hear that a lot. Times change. Welcome back guy. I'm just past "rookie" status. I'm giving LS1tech my attention for now. Met a lot of great folks and solid advice with resources. Too many websites to juggle. See ya around. PICS! 
Thread Starter
Teching In
Joined: Aug 2012
Posts: 10
Likes: 0
From: Woodinville, WA
Oh there'll be bolt ons! I'm looking at lids right now and I'll go from there. I threw a lou's short stick on right when I got it. It's def a little different compared to modding the LT1 I had before. The car came with a magnaflow exhaust; I haven't had a chance to climb under the car and see if it's just the muffler or a cat-back.
I'm heading to Vegas next week but after that I'm planning on starting the process. Any recommendations on good bolt-ons?
I'm heading to Vegas next week but after that I'm planning on starting the process. Any recommendations on good bolt-ons?
Trending Topics
Oh there'll be bolt ons! I'm looking at lids right now and I'll go from there. I threw a lou's short stick on right when I got it. It's def a little different compared to modding the LT1 I had before. The car came with a magnaflow exhaust; I haven't had a chance to climb under the car and see if it's just the muffler or a cat-back.
I'm heading to Vegas next week but after that I'm planning on starting the process. Any recommendations on good bolt-ons?
I'm heading to Vegas next week but after that I'm planning on starting the process. Any recommendations on good bolt-ons?
Bolt on wise, port & polish the TB along with the bump stop delete to the TB, UD pulleys, TSP makes a nice set of stainless 1-7/8 LT's & ORY. Those mods alone will add some good power on. I'd say look into a FAST Intake, but your current LS6 intake is more than fine. I'd change that out if and when you did H/C or cam only.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo Thread Starter
Teching In
Joined: Aug 2012
Posts: 10
Likes: 0
From: Woodinville, WA
I hadn't heard of the bump stop delete so that's good to know! I just looked up those headers, not bad at all price wise and I have the car registered at my folks place in Chelan so I don't care about emissions/cat. lol
I've been looking at the FAST intake so good to know I'm looking in the right direction.
I've been looking at the FAST intake so good to know I'm looking in the right direction.
I hadn't heard of the bump stop delete so that's good to know! I just looked up those headers, not bad at all price wise and I have the car registered at my folks place in Chelan so I don't care about emissions/cat. lol
I've been looking at the FAST intake so good to know I'm looking in the right direction.
I've been looking at the FAST intake so good to know I'm looking in the right direction.
On The Tree
Joined: Feb 2012
Posts: 104
Likes: 0
From: Portland Area
+1 for the FAST 92/92. I picked up good power all over the RPM range with it. Plus they look really cool 
Now I just need to ditch my factory 241 heads to something better. Money money money.......
Now I just need to ditch my factory 241 heads to something better. Money money money....... 
I challenge any bolton ls1 to a race! Only bolton car around here I cant beat is Tylerls1. Not to many bolton cars left in the group but its fun to race the ones that still are!
On The Tree
Joined: Feb 2012
Posts: 104
Likes: 0
From: Portland Area
. Yeah, your car is like SsStevens. Yeah, the mod bug hit me bad. Way too much schemeing and plotting with finances to blow cash on the dern things. Lol.
On The Tree
Joined: Feb 2012
Posts: 104
Likes: 0
From: Portland Area