Borrow valvespring tool?
Thread Starter
TECH Enthusiast
Joined: Jun 2004
Posts: 576
Likes: 0
From: Fredericksburg, VA
Borrow valvespring tool? Well, finally got back home on leave today and dove into finishing up the cam swap. I spent about 2 hours screwing around with the 5/16 rods to get them to hold up ALL the lifters at the same time, and finally got the cam in, gears aligned, and all that crap. However, my ghetto valvespring compressor is not cutting the mustard, and damn near ruined one of my rocker bolt threads. So if anyone would be so kind as to let me borrow a "real" valvespring compressor for a day or so, I would very much appreciate it. Thanks!
Thread Starter
TECH Enthusiast
Joined: Jun 2004
Posts: 576
Likes: 0
From: Fredericksburg, VA
sardog46, you are my new best friend. Since the TA is my only set of wheels right now, I guess I'll need "home delivery" if that's okay. When I finish it up I'll drop the tool off wherever you want, along with a case of whatever it is you're drinking these days. 
Give me a ring at (360) 654 0145 or (360) 631 9225. Ask for Matt. I'll be home all day, since I'm on leave. 
Guess that in the meantime I'll finish up installing the duals I got from TSP. Thanks again!
Give me a ring at (360) 654 0145 or (360) 631 9225. Ask for Matt. I'll be home all day, since I'm on leave. Guess that in the meantime I'll finish up installing the duals I got from TSP. Thanks again! 
