cage install
Thread Starter
10 Second Club
Joined: Mar 2004
Posts: 1,491
Likes: 1
From: norfolk va
cage install Well started the install today and got alot done, all the carpet and stuff is gone, and got all the mounting plates installed, and welded to the floor. tommorow going to tac the main hoop in place and then finish it up. i will post some pics when it is all done. Oh ny the way my heavy *** carpet is not going back in. that **** weighd in at 73lbs.
Sounds good Jason! Which cage did you get?
But I'm thinkin maybe that night in Boyce's garage has warped your mind.
Pretty soon your gonna be ripping the door panels off & trying to figure out how to replace the electric window motors with hand cranks. 
But I'm thinkin maybe that night in Boyce's garage has warped your mind.
Pretty soon your gonna be ripping the door panels off & trying to figure out how to replace the electric window motors with hand cranks. 
Joined: Nov 2001
Posts: 10,023
Likes: 6
From: LT1 land...the "409" of the 90s!
hehe I hear you on the carpet.
IF my car ever makes it back in my damn shop Mine is coming out and the cheap stuff is going in
Gotta be a way to get down to 3,450 with me in the car from my heavy 3,750!
I know Wheels will cut 100 right out the top but then it gets tricky...but I have ideas
Keep us up to date on this!
BTW make sure you tie in the rear shock towers or you WILL regret it
IF my car ever makes it back in my damn shop Mine is coming out and the cheap stuff is going in
Gotta be a way to get down to 3,450 with me in the car from my heavy 3,750!
I know Wheels will cut 100 right out the top but then it gets tricky...but I have ideas
Keep us up to date on this!
BTW make sure you tie in the rear shock towers or you WILL regret it
Thread Starter
10 Second Club
Joined: Mar 2004
Posts: 1,491
Likes: 1
From: norfolk va
i went with the wolf 6 point cromoly weld in. pretty easy install, if i could tig worth a damn, but thats what paint is for. Had to do a little grinding on some of the bars to make them fit right and still had to build up some weld on a one of the front tubes. it was just time consuming, don't worry mark the door panels are comming 
Elis, when i get ready to tub the car ............. then i will worry about the shocks being tied into the cage
Elis, when i get ready to tub the car
............. then i will worry about the shocks being tied into the cage 
