Good to see you're finally starting to see the light at the end of that dark tunnel. 
Back in the game....sort of.
Thread Starter
TECH Senior Member
iTrader: (9)
Joined: Dec 2001
Posts: 5,395
Likes: 1
From: Estero, FL
Back in the game....sort of. Well, I sealed the deal on a new motor on saturday. We are just hashing out the payment details. I wont get the thing for about 3 weeks is what I am guessing. I came up with the cash to buy the motor but not quite enough to get it shipped (300-400). So for those of you that were interested in some of the stuff I had, please get back to me. I still have the STB, Carpet and the radio and CD changer.
The motor is a '98 cam only motor. Its last dyno made 417rwhp through a TH350, 5000 stall (unlocked), 5.xx gears and "31 slicks. Has an upgraded oil pump, pushrods, underdrive pulley, Cloyes adjustable timing set with JWIS chain, TREX cam with double valve springs. Its last pass it went high 10's and with better tuning could probably get into the mid 10's. Not that I am going to even attempt that though.
I have everything else minus the intake (Mark has offered up his LS1 intake until I get a LS6 or 90mm "Thanks bro"), throttle body and headers.
I am going to go the "el cheapo" route on just about everything just to get the car running. So if anyone has any of the above mentioned parts they are looking to unload, no matter what the condition is please get ahold of me. I would really like to see this thing on the road before summer is over and especially before we move into the new house in late Aug.
The motor is a '98 cam only motor. Its last dyno made 417rwhp through a TH350, 5000 stall (unlocked), 5.xx gears and "31 slicks. Has an upgraded oil pump, pushrods, underdrive pulley, Cloyes adjustable timing set with JWIS chain, TREX cam with double valve springs. Its last pass it went high 10's and with better tuning could probably get into the mid 10's. Not that I am going to even attempt that though.
I have everything else minus the intake (Mark has offered up his LS1 intake until I get a LS6 or 90mm "Thanks bro"), throttle body and headers.
I am going to go the "el cheapo" route on just about everything just to get the car running. So if anyone has any of the above mentioned parts they are looking to unload, no matter what the condition is please get ahold of me. I would really like to see this thing on the road before summer is over and especially before we move into the new house in late Aug.
Last edited by NataSS Inc; Jun 7, 2005 at 05:12 PM.
OUTSTANDING!!! 
Let me know when you want the intake. And I have your old TB here too that Steve let me borrow the blade off of....it's back on now. Talk to him about it. And my coil kit is in transit, so you can have yours back whenever you need them.
We need to find a source for a few long Taylor wires. Maybe Jay Fisher could hook us up. I need one blue one & you need 3 red ones. I'll call him & see what he says.
Let me know when you want the intake. And I have your old TB here too that Steve let me borrow the blade off of....it's back on now. Talk to him about it. And my coil kit is in transit, so you can have yours back whenever you need them.We need to find a source for a few long Taylor wires. Maybe Jay Fisher could hook us up. I need one blue one & you need 3 red ones. I'll call him & see what he says.
Thread Starter
TECH Senior Member
iTrader: (9)
Joined: Dec 2001
Posts: 5,395
Likes: 1
From: Estero, FL
Originally Posted by WAHUSKER
OUTSTANDING!!! Let me know when you want the intake. And I have your old TB here too that Steve let me borrow the blade off of....it's back on now. Talk to him about it. And my coil kit is in transit, so you can have yours back whenever you need them.
We need to find a source for a few long Taylor wires. Maybe Jay Fisher could hook us up. I need one blue one & you need 3 red ones. I'll call him & see what he says.
Let me know when you want the intake. And I have your old TB here too that Steve let me borrow the blade off of....it's back on now. Talk to him about it. And my coil kit is in transit, so you can have yours back whenever you need them.We need to find a source for a few long Taylor wires. Maybe Jay Fisher could hook us up. I need one blue one & you need 3 red ones. I'll call him & see what he says.
As for the coil packs, I dont know if I can put them back on my car. Last I heard they were......*gasp* CLEAN! Dont know how well that would go with my long standing motief of "dusty".
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Thread Starter
TECH Senior Member
iTrader: (9)
Joined: Dec 2001
Posts: 5,395
Likes: 1
From: Estero, FL
I have a head unit and a 6 disc changer that Doug wanted but never heard back from him. I have my grey carpet that one of you guys said you wanted when I was a quiznos one day and never heard back, and then I have my red hotckis STB and never heard back from the guy that wanted it.
Alos have a bunch of stock stuff laying around. Heater core, couple of the AC lines are left, the AC radiator, blower motor, Stock steering wheel with air bag, passenger air bag as soon as I can get it out of the car, stock speakers.
Also have a Halo LE XBOX with everything except the Samsung DVDR and a bunch of LED's that I need to unload. Was going to make it a back up box a while ago with all the cool lights and stuff but kind of lost interest in building it. Hard part is moving the damn thing. The LE XBOX even bare (no internals) draw a premium if you can even find them.
Might be willing to unload a couple of my premium cigars too.
Tonight I will go through all my crap and get a FS list going.
Alos have a bunch of stock stuff laying around. Heater core, couple of the AC lines are left, the AC radiator, blower motor, Stock steering wheel with air bag, passenger air bag as soon as I can get it out of the car, stock speakers.
Also have a Halo LE XBOX with everything except the Samsung DVDR and a bunch of LED's that I need to unload. Was going to make it a back up box a while ago with all the cool lights and stuff but kind of lost interest in building it. Hard part is moving the damn thing. The LE XBOX even bare (no internals) draw a premium if you can even find them.
Might be willing to unload a couple of my premium cigars too.
Tonight I will go through all my crap and get a FS list going.
Hey boyce, I said i was interested in the carpet but have since changed my mind. I am just going to pony up and get the lightweight stuff via speed inc. Sorry.
You still have the th350 for sale? I may have somebody who is interested.
Nate
You still have the th350 for sale? I may have somebody who is interested.
Nate
Joined: Nov 2001
Posts: 10,023
Likes: 6
From: LT1 land...the "409" of the 90s!
So what you doing with the old motor? I could use one for a truck project i got going on 
Going to toss a TPI in it for now but want to put a LS1 based Tubro setup in it
Going to toss a TPI in it for now but want to put a LS1 based Tubro setup in it 