EJ - Dyno ?
TECH Regular
Joined: Jul 2005
Posts: 452
Likes: 0
Lmao, I just posted in your other thread asking if your coming. Honestly I need to get more details on how many cars are coming. I know as of sat. we were waiting for conf. on how many cars. I will get more info for you and Tyler tomorrow.
Rokko, Marysville Speed and Custom. I believe we will be rackin em up at 8:30 but I will find out what was scheduled tomorrow and make sure.
Rokko, Marysville Speed and Custom. I believe we will be rackin em up at 8:30 but I will find out what was scheduled tomorrow and make sure.
Trending Topics
TECH Regular
Joined: Jul 2005
Posts: 452
Likes: 0
Well guys the best I can tell you at this point is we are still waiting for a confirmation on how many cars.
Mark, if your wanting to do any tuning it might not be the best day honestly. But we can see how it goes, there might not even be that many cars. Hopefully they will call and confirm soon so we can get this all figured out.
As soon as I know anything I will let you all know.
E.J.
Mark, if your wanting to do any tuning it might not be the best day honestly. But we can see how it goes, there might not even be that many cars. Hopefully they will call and confirm soon so we can get this all figured out.
As soon as I know anything I will let you all know.
E.J.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Thread Starter
10 Second Club
iTrader: (4)
Joined: Feb 2004
Posts: 9,448
Likes: 0
From: Marysville, WA
Kepp us posted EJ. I will probably show up to see what's going on. My supplier (at work) is in town - he's a modified circle track guy from Florida & is looking for something to do over the weekend. Your shop is full of gear-head eye candy....
And I would like to do a little tweaking, but hopefully no serious tuning is required at this point. Make a run & tweak the a/f, make another run & if things are OK, then disconnect the ATI in-line fuel pump & make 1 more run to see if anything changes.
And I would like to do a little tweaking, but hopefully no serious tuning is required at this point. Make a run & tweak the a/f, make another run & if things are OK, then disconnect the ATI in-line fuel pump & make 1 more run to see if anything changes.
TECH Regular
Joined: Jul 2005
Posts: 452
Likes: 0
Hey bill, how ya goes it? Getting close to time to rack up the plastic fantastic pretty soon too eh? Hope ya get a chance to stop by.
Mark, hopefully we can squeeze ya in. Just have to see how it goes. Even if they confirm alot of cars it doesnt mean much. Like last sat. we were supposed to have 16+ cars and only 11 showed up. We were all done and cleaned up before 2:00.
Mark, hopefully we can squeeze ya in. Just have to see how it goes. Even if they confirm alot of cars it doesnt mean much. Like last sat. we were supposed to have 16+ cars and only 11 showed up. We were all done and cleaned up before 2:00.
Thread Starter
10 Second Club
iTrader: (4)
Joined: Feb 2004
Posts: 9,448
Likes: 0
From: Marysville, WA
Thanks EJ, I will stop by & see how things look. Time?
Their address is 5701 48th Dr NE Marysville. Easy to get to. Take the 1st n-bound Marysville exit off I-5 (#199, hwy 528) go east about 1 mile, turn right on 47th, go past the stop sign about 3 blocks, turn left go 1 blk, turn left go to the end & turn right into their lot.
Their address is 5701 48th Dr NE Marysville. Easy to get to. Take the 1st n-bound Marysville exit off I-5 (#199, hwy 528) go east about 1 mile, turn right on 47th, go past the stop sign about 3 blocks, turn left go 1 blk, turn left go to the end & turn right into their lot.
TECH Regular
Joined: Jul 2005
Posts: 452
Likes: 0
Well guys we are having the typical no confirmation till the last minute routine. Honestly, it might be a good idea to maybe rig up a dyno day for the site here. It looks like we could get a pretty good group.
Mark, best thing I can tell ya at this point is maybe stop by around noon (earlier if you want to just hang out see some cars run), we should know how things are going by then. Otherwise, I will let ya know if we get an actual car count.
Everyone else, you are welcome to stop by and see how its going anytime of the day. If nothing else you can hang out for a few and check out the shop. If it works out we will get ya racked up. But the scheduled group has to be our first priority.
Mark, best thing I can tell ya at this point is maybe stop by around noon (earlier if you want to just hang out see some cars run), we should know how things are going by then. Otherwise, I will let ya know if we get an actual car count.
Everyone else, you are welcome to stop by and see how its going anytime of the day. If nothing else you can hang out for a few and check out the shop. If it works out we will get ya racked up. But the scheduled group has to be our first priority.
Thread Starter
10 Second Club
iTrader: (4)
Joined: Feb 2004
Posts: 9,448
Likes: 0
From: Marysville, WA
Thanks for the update EJ. I'll swing by before noon (provided I get off work by then) & see what's going on. If I don't get in this week it's no big deal. I have some minor mods planned for the near future that I'll want to tweak in. And an LS1tech dyno day sounds like a good idea.