sidewayz28

iTrader: (24)

hey i was wondering if i can make my own gasket for the AIR system. i need a gasket for the drivers side header/air flanges. if i can manage to make one i can go down to Tom to get my tune done tommorow. i ordered one at GM and its arriving tommorow which is one day too late . any help would be appreciatedddddddd
-joey

Rokko

iTrader: (2)

if you have the skills you can make your own gasket for anything. just get the correct material for the application.

LSxChevelle

iTrader: (4)

Go to Schucks or any parts store and ask for gasket material. Try and find a material made for heat. Cut a small piece that is a little bigger than the AIR connection, then hold it down on the header flange and rub hard on all edges to make an imprint. Then just cut it out. Anything will help to get you by...

sidewayz28

iTrader: (24)

thanks appreciate it.. yeah the one i ordered from GM should be here tommorow they said so i need something thatll get me through tommmorow!! thanks guys ill go do that

99blancoSS

iTrader: (115)

I had a similar issue. Went to Napa got some gasket material. Voila! To easy. I have a bunch of it left over as well to bad your not closer you could have some of it.

sidewayz28

iTrader: (24)

thanks for the help. made my own.. now im just finishing up an oil change and off to Tom tommorow for the tune !!!! wish me luck
im a pro at making AIR gaskets.. made my own stencil j/k about the pro comment....

99blancoSS

iTrader: (115)

What time you gonna be there? I was very interested in that t2

sidewayz28

iTrader: (24)

tommorow around 9 am. im leaving my house at around 7:30 so well see how fast i can mob down there . you should come stop by