Random stuff for sale
Random stuff for sale 1. 226/222 Camshaft Custom ground from CamMotion, its approx .580" lift on a 115 lsa, Great Turbo Cam shaft would also make a great daily driver cam with really flat torqe and good HP gain on a Naturaly aspirated car. ($225 Local/$250 shipped) Sold
2. Bilstien HD Shocks. Best handling shocks I've had. Low miles. ($350 local/$375 shipped (Sold)
3. Higher Springrate LS1 SS front springs. Came out of my 98 SS Camaro. These have a higher spring rate than Z28 springs. Handle awesome ($100 local/$125 shipped)
4. Wilwood Six Piston front brake Kit, 12.9" rotors, Billet 6 piston Calipers, two piece slotted rotors/ aluminum hats. Low Miles ($1200 local/$1250 shipped)
5. Black ZR-1 17X9" and 17X11" Wheels with the polished Lip, Includes center caps and lug nuts, Fronts are brand new never out of the box, Rears have very low miles ($500 Local/ $500 + actual shipping)
6. Snow Stage 2 Methanol Injection Kit, includes boost proportional controller, pump, lines, check valve, nozzel, and tank ($300 local/$325 shipped) Price Lowered)
7. Comp Cams 224/224 .580 lift 115 lsa (no advance ground in). Great cam all around, smooth idle lots of power potential ($225 Local/$250 Shipped)
8. Wolfe Racecraft Bolt in 6 point Roll bar, Black powder coated, low slung door bars, rear bars attach to the rear deck. ($350 Local only) Sold
9. Suspention Techniques Front Sway bar, this thing is massive! It WILL make your car handle like its on rails, one of the BEST mods you can do to your street car. ($80 local/ $115 shipped) Sold
Will Add Pictures Later!
Ryan K.
Shipping only to the 48 States!
2. Bilstien HD Shocks. Best handling shocks I've had. Low miles. ($350 local/$375 shipped (Sold)
3. Higher Springrate LS1 SS front springs. Came out of my 98 SS Camaro. These have a higher spring rate than Z28 springs. Handle awesome ($100 local/$125 shipped)
4. Wilwood Six Piston front brake Kit, 12.9" rotors, Billet 6 piston Calipers, two piece slotted rotors/ aluminum hats. Low Miles ($1200 local/$1250 shipped)
5. Black ZR-1 17X9" and 17X11" Wheels with the polished Lip, Includes center caps and lug nuts, Fronts are brand new never out of the box, Rears have very low miles ($500 Local/ $500 + actual shipping)
6. Snow Stage 2 Methanol Injection Kit, includes boost proportional controller, pump, lines, check valve, nozzel, and tank ($300 local/$325 shipped) Price Lowered)
7. Comp Cams 224/224 .580 lift 115 lsa (no advance ground in). Great cam all around, smooth idle lots of power potential ($225 Local/$250 Shipped)
8. Wolfe Racecraft Bolt in 6 point Roll bar, Black powder coated, low slung door bars, rear bars attach to the rear deck. ($350 Local only) Sold
9. Suspention Techniques Front Sway bar, this thing is massive! It WILL make your car handle like its on rails, one of the BEST mods you can do to your street car. ($80 local/ $115 shipped) Sold
Will Add Pictures Later!
Ryan K.
Shipping only to the 48 States!
Last edited by Ryan K; Sep 24, 2007 at 10:42 PM.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Originally Posted by sexasomniac
Interested in the cage if you will go $300.
Probably a stupid question but, does this already have a place to bolt harness to?
Probably a stupid question but, does this already have a place to bolt harness to?
Sure, I'll go $300 for the bar. I'll have it out in about a week. Is that OK?
Originally Posted by Rokko
Is the swaybar hollow? If so I'll take it.
Ryan K.
Originally Posted by LS1>*
Ryan K.
Originally Posted by PONYEATER
Yeha and the spacers you have to run in the front would make the TA look like a race car in NOPI! :p
Ryan
Originally Posted by Ryan K
I'm not sure if its Hollow or not, but You can ask Ellis how he likes his, Or Silverbullet 02. It really makes a drastic difference...
Ryan K.
Ryan K.
Originally Posted by Ryan K
I'm not sure if its Hollow or not, but You can ask Ellis how he likes his, Or Silverbullet 02. It really makes a drastic difference...
Ryan K.
Ryan K.
Originally Posted by Turbo Tech
Boy that had better not be that sway bar I had to build your turbosystem around!!!
LOL, Yup, you know I told ya that I'd take it off if it was too much of a pain.
On The Tree
Joined: May 2007
Posts: 186
Likes: 0
From: Everett, WA
Originally Posted by Ryan K
Sure, I'll go $300 for the bar. I'll have it out in about a week. Is that OK?