SLP Grill Project
SLP Grill Project Picked this grill up really reasonable, but it was damaged with some distortion, deep scratches, and spider webbing. Plan is to repair the damage and custom paint it with a white center with a gunmetal surround and center line. Emblempros is making a one-off bowtie badge for it also.
When I got it:
When I got it:
Last edited by tmurph01; Jan 13, 2013 at 07:11 PM.
actually managed to get a little mud on it last night then... ill start sanding when I get home tonight. im doing small i think were gonna get away with not having to build up alot on the centerline. Ill try to post some pics tonight.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Gifts Neither Your Dad Nor Grad Will Shove Into the 'Trinket Drawer'
Brett Foote
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
pretty much what tmurph said, just alot of heating, bending, heating bending... i was able to get it pretty close, what i couldnt get straight i corrected with filler. Then just alot of highbuild primer and sanding. Overall wasnt to bad... hopefully ill have some pics of it cleared here soon. Unfortunatly i have a little blemish i have to sand back out. Just waiting on the clear to finish setting up now. Really makes the colors pop though.
slight update... I used a new clear on this thing and its refusing to set up right for me. Has the whole project stalled. 3 days and its still not dry to the touch, i guess since it had a hard time setting it developed a fairly nasty little run in it. Shouldnt be hard to take care of once it drys but at this rate that may be awhile 
hopefully ill have a photo update soon
hopefully ill have a photo update soon 