After tons of search seems like oem windshield weatherstrip molding is discontinued and cant be found anywhere.There are tons of aftermarket ones in market.I bought one but the appereance in terrible not even close to Oem one .
My can is 2000 Camaro z28 Ttop.

If someone can help me about that i would really appriaciate .

Regards

Contact WS6 store, they are pretty helpful.

MIk.

When I was doing this search when I had to replace my windshield I found that OEM is indeed discontinued. The aftermarket is only available in the gloss black, so if you had the OEM flat black like I did you're out of luck.

Here's the thread about my research and the post below mine by RPM WS6 clarifies the molding:

https://ls1tech.com/forums/paint-bod...l#post19699544

Thank for the information.I know the flat and the gloss oem windshield molding is discontinued but i saw a post someone is trying to glue his aftermarket windshield molding and it looks same as the gloss oem molding i am just trying to find that one it cant be that hard...