Powder coat question
Thread Starter
On The Tree
Joined: Feb 2018
Posts: 163
Likes: 2
Powder coat question Hey guys, I had some motorcycle wheels shot in powder coat and although they did a decent job masking off all necessary areas (bearing holes, disc brake threads, etc) there are a few spots where it isn't perfect, like where the rotors sit and what not. Just want to make sure it's perfect so I dont have any issues after assembly like brake vibration and what not. Also a little lumpy on the flanges above where the bearing seals sit (shouldnt be an issue but again just want to avoid any headaches)
Thought i'd ask you guys what the best way is to do some light touch up removal. I was gonna go straight for the sand paper but just thought i'd ask for some tips first. Just want a clean bare surface in a few key spots.
Thought i'd ask you guys what the best way is to do some light touch up removal. I was gonna go straight for the sand paper but just thought i'd ask for some tips first. Just want a clean bare surface in a few key spots.
