Triangle shaped part on quater panel?
02-13-2007, 05:17 PM
#1
TECH Fanatic
Thread Starter
iTrader: (10)
Join Date: Apr 2006
Location: NJ
Posts: 1,320
Likes: 0
Received 0 Likes
on
0 Posts
Triangle shaped part on quater panel? Whats the name of that triangle shaped black molding that seems to get affixed to the sail panel where the door, quater panel and roof all meet? And how do you remove it? Is it adhesive backed where i can remove it with a heat gun or is there a stud on the back where I have to remove a speed nut from the inside?
02-17-2007, 10:08 AM
#2
TECH Regular
iTrader: (1)
Join Date: Mar 2004
Location: Minnesota
Posts: 428
Likes: 0
Received 0 Likes
on
0 Posts
The part is called an applique Part #'s are 10240164 and 10240165.
It is held on with double sided tape. You can get it off with a heat gun and a putty knife. There is no stud.
They are cheap(less than $10 each) from GM.
Good luck!
It is held on with double sided tape. You can get it off with a heat gun and a putty knife. There is no stud.
They are cheap(less than $10 each) from GM.
Good luck!
02-18-2007, 08:18 PM
#6
TECH Addict
Join Date: Apr 2002
Location: Waldwick, NJ
Posts: 2,418
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 2000LS1TA
I just checked these out, on www.gmpartsdirect.com by using the #'s posted above. They're like $4.50 a piece 
that's dirt cheap
that's dirt cheap
