I just tried putting this hood on.. and check it out.. Its insanely off.
Its not even latching.

 

Anything can be made to fit. It's not unusual for knock off hoods to require an afternoon's or even a full day's work to fit well. Holes on brackets often need to be elongated with a carbide bit on a rotary tool, as well as grinding on specific areas of the fiberglass and adjusting everything

 

That looks like a matter of messing with hinge bolt positions, as well as possibly lowering the hinges a little. You'll also probably need to adjust the bump stops towards the front.

My VFN hood also required 3 notches on either side to clear the fender bolt heads.

 

You can use button head allen bolts to cure the "hood too wide, interfering with bolts" problem.

 

not sure what that is..

I got rid of the hood. I've been working on it all day. Sold it to someone for $200. He put it on at my house and it fit perfectly first try. Now I have to put the brackets back on my old hood and try to get it to fit. Today was a total waste of time and I had no idea what "adjusting" a hood meant. now I know. And I hate it LOL