forged ls1,rebuilt ls7, t56, harness, pcms, sts turbo stuff
 

1.7 ratio comp shaft mounted rockers. used, but i never used them. includes hardware and shims 400

tfx 498 billet hemi block. bought it to make a table out of. includes studs and new main caps. 650

forged ls1.

243 heads
pac 660 springs
del west titanium intake and exhaust valves
new rockers with trunion upgrade
7.4 hardened pushrods
232/240 .595/.608 cam
stock ls1 intake and tb
new ls7 lifters and trays
new knock sensors and harness
ls9 head gaskets
head studs
diamond flat top pistons
eagle rods
arp main studs
clevite cam, rod, and main bearings
double roller timing chain
melling high volume oil pump
new front and rear cover gaskets and crank seals
new oil pan gasket
f body oil pan
crank sensor, oil pressure sensor. cam sensor included
rotating assembly was balanced to half a gram
ls1 steam pipe setup
ls1 fuel rail and rail adapter
fresh bore at 3.905. mains, rod bearings and cam bearings blue printed. have receipts for the work performed. hasn't been ran yet.

5000


2010 LS7 rebuilt
24x relucter wheel
clevite cam, rod, and main bearings
arp main studs and head bolts
ls7 head gaskets
heads have 0 miles on them since bronze valves guides and 3 angle valve job.
milled .030 to bump compression
ferra hollow stem exhaust and ti intake valves
fast lsxr 102 with ptm 102 cable tb
stock rods and pistons
crank balanced to half a gram and micro polished
lsxr cam shaft
.700 lift pac springs with ti retainers
3/8th hardened btm pushrods
c5r timing chain
new oil pan gasket
f body accessories
custom harness
new ati damper
new main seals and timing cover gaskets

9000

80k miles t56 with low mileage ls7 clutch with pro 5.0 shifter. 1500

2004 ctsv harness and computer. 300


sts 72mm ball bearing turbo, turbo smart wastegate 6 psi spring, turbo smart 50mm bov, remote oil pump. 500

pm offers or questions. should have some pics this week.Attachment 629251

Attachment 629252

Attachment 629253

Attachment 629254

Attachment 629255

Attachment 629256

Attachment 629257

Attachment 629258

Attachment 629259

Where in Florida and how much for the shortblock?

Pm me an offer. 45 minutes north of Orlando. Go to west palm every week though.

I'm in Leesburg, just wondering ballpark on the shortblock

How much for the engine?

Would you be willing to sell the pro 5.0 separate?

Are u willing to sell just the heads?

bump!

Any idea what kind of power the forged ls1 should make? Also did you do the assembly or a small? If so which. Just threw a rod bearing in mine so in need :(.
Thanks!
Chris

should be able to take 800hp reliably. everything said around 900-1000hp when it was put together. shop in south florida assembled both motors. have receipts for serious buyers.. have receipts for all new parts also.

bump!

Stock crank?

Pics of tfxblock? Whats wrong with it?

pm'd.

Any other parts related to the sts

Is the ls7 setup for wet sump?