SOLD tick performance turbo cam brand new stg2
01-04-2018, 03:11 AM
#1
Teching In
Thread Starter
iTrader: (2)
Join Date: Mar 2016
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
SOLD tick performance turbo cam brand new stg2 Category: Accessories
Price: $300
Part Fits: 2010+ Camaro, Corvette, 04+ Cadillac CTS-V
Location (State): MI
Item Condition: Brand New
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9
LS Engine?: Fits LS Engine
Tick Performance proudly offers our Elite Series of Camshafts designed specifically for LS3 & L99 Engines! Using the latest and greatest technology available, we've put together a complete line of Camshafts that are designed to meet every goal, from mild to wild. Our Elite Series of Camshafts are all manufactured by COMP Cams or Cam Motion and are updated with a new version every time an advancement in valvetrain technology becomes available, so they're ALWAYS cutting-edge! Although we suggest measuring for piston-to-valve clearance during ANY camshaft install, every Elite Series Camshaft is designed to fit in a stock engine & stock heads with adequate clearance unless otherwise noted. These cams are designed to maximize power, reliability and valvetrain longevity.
Tick Performance Turbo Stage 2 Camshaft for LS3 & L99 Engines
227/235 | .624”/.610” | LSA115+5
Designed for: LS3, L92, LY6, L76 and L99 Engines with Square Port Heads (as they're equipped with stock)
Basic Operating RPM Range: 2000-6600
Expected Horsepower Gains: 45-50RWHP over the stock camshaft in a well-optimized setup
Stall Converter Required: Yes, 3600+RPM
Rear Gear Upgrade Required: No
Works Well with Nitrous: No, designed for turbocharged applications
Will Pass Most Smog Emissions: No
Our Tick Performance Turbo Stage 2 Camshaft is intended for engines that are utilizing up to a 96mm turbine wheel. Just because this is an “LS3” cam does not mean you cannot use this camshaft in a smaller engine with cathedral port heads! Whether it’s a stock cubic inch build, forged bottom end build, or a junkyard motor that you just want to slap a turbo camshaft in and run fast on the street (and at the track) with - this cam is for you. This camshaft will have a much more noticeable idle than our Turbo Stage 1 camshaft, but nothing radical. This camshaft will not work in vehicles equipped with VVT or DOD. If your vehicle still has these systems, they will need to be deleted at the time of the camshaft install (parts sold separately.) We strongly suggest the use of our Tick/PAC Dual Valvesprings and hardened pushrods with this camshaft (also sold separately.) Hundreds of hours were spent developing this camshaft to perform precisely the way we advertise, so as a result, changes to the LSA or any other specification of this camshaft are not available.
Last edited by hitmix300; 01-17-2018 at 12:06 PM.
