WTB: posi unit for 2000 Trans Am
 

Looking for a differential for a 2000 Trans Am. Need a 3 series carrier with or without gears. I have 3.23, but would like to upgrade to 3.42 or maybe 3.73. The factory one is a one tire fire right now. Can't afford to spend a crap load, just a decent used factory unit.

Thanks,
Chris

I am located in Proctorville, OH 45669 if you are adding shipping.

is your car a 3 channel or 4? 4 channel carriers wont work in a 3 channel unless you get the reluctor ring installed.

It is a TCS car, so that makes it a 4 channel, right??

I would also take the whole rearend if you are close enough and cheap enough, LOL.

i have a brand new never opened set of motive 3.73 gears and complete ring and bearing install kit.

i bought it then found out my car already had gears
ill sell it for 250 if you're interested..

my email is adrew27l@aol.com
i will reply to that sooner then a message on here

Andrew

If you just swap out a new carrier,keeping your 3.23s' and assuming your pinion gear bearings are OK and you're not gonna touch the pinion,you'll just have to reset backlash.If you also change gear,you'll have the entire gear swap procedure to do.
I have a couple 3.42 4 channel w/torsen rearends complete,but I'm up by the lake in the Cleveland area,too far for you.