Camshaft wanted
Thread Starter
TECH Fanatic
iTrader: (14)
Joined: Jun 2010
Posts: 1,807
Likes: 13
From: Little River SC
Camshaft wanted Looking for a LS1 cam in the neighborhood of a TSP 228. It has 228 degrees at .050 and .588 lift. Prefer a 112 lobe angle. If you have something close, I might be persuaded. There's gotta be somebody who took one of these out to go bigger around here. Thanks
I have a brand new never installed 224r specs are 224/224 581/581 112 lsa from tsp and new pac beehive springs. $450 zero miles on all parts. Went with a AFR package instead. pm if interested
have a good cam... Farmington, i am about to change my cam, is a 230/242 613/613-116- lsa, the part #54-000-11 COMP CAMS grind#ls1 3016r /3038r hr116.0 this cam sounds owsome, has an incredible botton end power and will brake the tires loose at 40mph with any-thin other than slicks, the reason is i have 10.7 to 1 comp and i am changing my pistons to 12.5 to 1, on e85 and i am going with 243 int duration cam to match, if you can use this cam will defenetly give you more power than the one with less duration you mention, the more duration on the intake, more power, it will idle around 750 rpm and is easy to tune, led me know, best regars, David.
