TFS 245's/AFR 245's/All Pro 250's/any bad ass 245cc+ cylinder heads
08-24-2012, 08:34 AM
#1
TFS 245's/AFR 245's/All Pro 250's/any bad *** 245cc+ cylinder heads Looking for a bad *** set of cylinder heads for my high compression 4xx cubic inch build.
Mainly looking for AFR or TFS 245's, but I would also like a set of the All-pro race 250cc drag port cylinder heads. If you've got something else that flows in the 350-360cfm+ range on the intake and 250cfm+ on the exhaust without an exhaust fixture or 285-290cfm+ with an exhaust fixture in place LMK and I'll consider them highly.
Even if you don't have one of these set's of cylinder heads, but have a set of bad *** 245cc+ intake runner heads post them up and let me know what you got. Shaft mount rockers a definite plus as are mechanical roller valve springs, 3/8" push rods on the intake and 7/16" on exhaust. Also a plus if the heads will accept or already do accept 1/2" head studs.
Mainly looking for AFR or TFS 245's, but I would also like a set of the All-pro race 250cc drag port cylinder heads. If you've got something else that flows in the 350-360cfm+ range on the intake and 250cfm+ on the exhaust without an exhaust fixture or 285-290cfm+ with an exhaust fixture in place LMK and I'll consider them highly.
Even if you don't have one of these set's of cylinder heads, but have a set of bad *** 245cc+ intake runner heads post them up and let me know what you got. Shaft mount rockers a definite plus as are mechanical roller valve springs, 3/8" push rods on the intake and 7/16" on exhaust. Also a plus if the heads will accept or already do accept 1/2" head studs.
