Much needed
Much needed I need a 2000 Camaro/Firebird/Trans AM PCM, with harness would be preferable, last deal went sour as someone forgot to pay me so i could buy.
I also need an f-body oil pan, windage tray and oil pickup for my LS1
This is more aftermarket needs but this is just out there to see if you guys have any good parts ya need to ditch, here's what i'd like to purchase.
Aluminum intake manifold that'll hold up to 30psi of boost
Throttle by cable throttle body (bigger bore the better)
Red beauty covers (doubtful they're out there used but hey why not?)
4 inch forged crank good for over 1000 HP
A good cam for a twin turbo motor
That should about do it, priority goes to PCM and oil pan but if you have anything please please let me know. Thanks much,
Andrew
I also need an f-body oil pan, windage tray and oil pickup for my LS1
This is more aftermarket needs but this is just out there to see if you guys have any good parts ya need to ditch, here's what i'd like to purchase.
Aluminum intake manifold that'll hold up to 30psi of boost
Throttle by cable throttle body (bigger bore the better)
Red beauty covers (doubtful they're out there used but hey why not?)
4 inch forged crank good for over 1000 HP
A good cam for a twin turbo motor
That should about do it, priority goes to PCM and oil pan but if you have anything please please let me know. Thanks much,
Andrew
Bumpin this post up. Tell me anything and everything you got for sale I need parts for my LS1 to 3rd gen swap. Here's more to the list
Sub frame connectors, sway bars, 4-link suspension, quick change rear axle, under drive pulleys, torque arm, carbon fiber drive shaft, a built T56, or a stock T56 that can be built up, a short throw shifter, racing seats.
That should do it, need these parts badly to get this project well on its way.
Sub frame connectors, sway bars, 4-link suspension, quick change rear axle, under drive pulleys, torque arm, carbon fiber drive shaft, a built T56, or a stock T56 that can be built up, a short throw shifter, racing seats.
That should do it, need these parts badly to get this project well on its way.
if you're looking to do a motor plate setup i have an LS1 motor/mid plate setup that i am trying to sell. comes complete with everything needed to install. pm me if you're interested. i have na ls1 kmember also but not sure those fit the 3rd gens. i also have a set of race seats i'm trying to get rid of. 
that's them....pm if interested in anything
that's them....pm if interested in anything
On The Tree
Joined: Oct 2004
Posts: 118
Likes: 0
From: DFW
Originally Posted by 350-Z28
I need a 2000 Camaro/Firebird/Trans AM PCM, with harness would be preferable, last deal went sour as someone forgot to pay me so i could buy.
I also need an f-body oil pan, windage tray and oil pickup for my LS1
This is more aftermarket needs but this is just out there to see if you guys have any good parts ya need to ditch, here's what i'd like to purchase.
Aluminum intake manifold that'll hold up to 30psi of boost
Throttle by cable throttle body (bigger bore the better)
Red beauty covers (doubtful they're out there used but hey why not?)
4 inch forged crank good for over 1000 HP
A good cam for a twin turbo motor
That should about do it, priority goes to PCM and oil pan but if you have anything please please let me know. Thanks much,
Andrew
I also need an f-body oil pan, windage tray and oil pickup for my LS1
This is more aftermarket needs but this is just out there to see if you guys have any good parts ya need to ditch, here's what i'd like to purchase.
Aluminum intake manifold that'll hold up to 30psi of boost
Throttle by cable throttle body (bigger bore the better)
Red beauty covers (doubtful they're out there used but hey why not?)
4 inch forged crank good for over 1000 HP
A good cam for a twin turbo motor
That should about do it, priority goes to PCM and oil pan but if you have anything please please let me know. Thanks much,
Andrew
