PCM Diagnostics & Tuning HP Tuners | Holley | Diablo

Quick Question

Thread Tools
 
Search this Thread
 
Old Nov 5, 2008 | 10:22 PM
  #1  
twpetry's Avatar
Thread Starter
12 Second Club
iTrader: (1)
 
Joined: Feb 2008
Posts: 183
Likes: 0
From: Fredericksburg, VA
Default Quick Question

I recently replaced my knock sensors, both were bad. But now i am still getting a code for Knock Sensor 2. which sensor is number #2 ???? is it the one towards the front of the car or the rear? here is my problem, one knock sensor was dropped and bounce off the pavement, that one was placed towards the rear of the car. and while taking the old senors out, the harness piece that plugs into the sensor towards the front of the car was damaged. so i either need another new sensor, or a new harness. please help, i'm not happy as it has taken me awhile to replace, and the automatic knock retard @ WOT is eating me alive. I wanna get this fixed ASAP! then on to the business of a rematch with a terminator.......
Reply
Old Nov 6, 2008 | 04:22 PM
  #2  
Ice78Transam's Avatar
TECH Enthusiast
iTrader: (1)
 
Joined: Jun 2008
Posts: 510
Likes: 0
From: Naperville, Ill
Default

Rear of the car (i believe)
Reply
Old Nov 9, 2008 | 05:53 PM
  #3  
twpetry's Avatar
Thread Starter
12 Second Club
iTrader: (1)
 
Joined: Feb 2008
Posts: 183
Likes: 0
From: Fredericksburg, VA
Default

^^ correct sir! i figured i'd post up for anyone else who might need it:

P0327-Knock Sensor 1 Circuit Low Input (Front)

P0332-Knock Sensor 2 Circuit Low Input (Rear)

Reply




All times are GMT -5. The time now is 12:25 AM.