PCM Diagnostics & Tuning HP Tuners | Holley | Diablo
Sponsored by:
Sponsored by:

timing advance in neutral??

Thread Tools
 
Search this Thread
 
Old 12-13-2008, 02:32 PM
  #1  
On The Tree
Thread Starter
iTrader: (49)
 
FSTR/TA's Avatar
 
Join Date: Dec 2007
Location: Waco TX
Posts: 119
Likes: 0
Received 0 Likes on 0 Posts

Default timing advance in neutral??

At idle I'm at 28 degrees timing if I am at 2000 rpm and up it is as 40-42 degrees. I know this isn't under load but is this right??
Old 12-14-2008, 08:13 AM
  #2  
LS1 Tech Administrator
iTrader: (14)
 
Patrick G's Avatar
 
Join Date: Nov 2001
Location: Victoria, TX
Posts: 8,244
Likes: 0
Received 31 Likes on 27 Posts

Default

First off, 28 degrees is really too high for base timing if you want your spark under/over speed correction to work well. But yes, it's very common for base spark tables to jump up to 40 degrees at 2000 rpm and above. Easy to change though.
__________________

2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2018 Cadillac Escalade 6.2L A10 Pat G tuned.
LS1,LS2,LS3,LS7,LT1 Custom Camshaft Specialist For custom camshaft help press here.
Custom LSX tuning in person or via email press here.




All times are GMT -5. The time now is 02:20 PM.