HP tuners serial to interface upgrade question
Thread Starter
11 Second Club
iTrader: (43)
Joined: Aug 2006
Posts: 5,364
Likes: 2
From: Summerville, SC
HP tuners serial to interface upgrade question By paying 200 bucks to "upgrade", am I getting the standard or the professional version? Also it says that I will not get any credits, so I will have to pay an additional 100 dollars for two credits to purchase the 2 bar / 3 bar enhancement? Can someone shed some light on this for me please.
Open you file, and click the OS button, and see if it says "available" next to the 2 bar sd button.
I don't know anything about the serial version, so I don't know for sure if you can use a custom OS with one, but I would think so. It's a change to the OS in the PCM and really has nothing to do with the tool.
Lemme know if ya need a base file.
I don't know anything about the serial version, so I don't know for sure if you can use a custom OS with one, but I would think so. It's a change to the OS in the PCM and really has nothing to do with the tool.
Lemme know if ya need a base file.
Thread Starter
11 Second Club
iTrader: (43)
Joined: Aug 2006
Posts: 5,364
Likes: 2
From: Summerville, SC
So I just have to use the re write entire on to chance the os in the pcm and I'll be able to take advantage of the 2 bar OS with my serial version. That appeared to have worked. Any chance I can get a base file for the GT70 setup Ed, you have my n/a tune 
edcmat-l1@msn.com
Gimme the rundown of all the mods in an email.
