Tuning question, please help..
{B4307} Desired Airflow
Used to reduce airflow as the engine warms up.
Although listed in the "Idle" section, this calibration also controls the base airflow for non-idle conditions.
Log parameters (PIDS):
GM.IAC_LTD_DMA & GM.IAC_STD_DMA
and (A4)
GM.IAC_LTPN_DMA & GM.IAC_STPN_DMA
Then add the values of a calc.pid derived from those PIDS
The calc.pid is defined:
{GM.IAC_LTD_DMA} + {GM.IAC_STD_DMA} = X
and (A4)
{GM.IAC_LTPN_DMA} + {GM.IAC_STPN_DMA} = X
You might want to try raising your
Throttle Cracker Activate and Deactivate Speeds, that may help.
Trending Topics
The Best V8 Stories One Small Block at Time



