LS1 PCM is Shot
Thread Starter
Teching In
Joined: Mar 2008
Posts: 13
Likes: 0
From: 1000 Oaks Calif
Well I found the part # on GM Performance. This is the kit below. I was quoted $950 for it. It's the whole package as you can see. BuffJoeyD pretty much said exactly what I was told by Jason at Timeless. Jason also mentioned that I have an older engine with a 24 tooth "something or another" kind of sensor??????? Apparently newer models have a 64 tooth??? Now to see if I can find a deal on this set up.
19201861
LS Controller Kit:
Includes all the components required to run your GM Performance Parts crate engine
For individual engine controller, use P/N 19201859
The kits above (P/N 19166567, 19166568, 19201327, 19201327, 19201861) include the following items:19166573 Engine Harness
12576410 Mass Air Flow Meter
19166574 Mass Air Flow Meter Mounting Boss
10367117 Accelerator Pedal Assembly
12581966 Oxygen Sensor (Qty 2 Per Kit)
15156588 Oxygen Sensor Mounting Boss (Qty 2 Per Kit)
19171935 Instruction Sheet
19201861
LS Controller Kit:
Includes all the components required to run your GM Performance Parts crate engine
For individual engine controller, use P/N 19201859
The kits above (P/N 19166567, 19166568, 19201327, 19201327, 19201861) include the following items:19166573 Engine Harness
12576410 Mass Air Flow Meter
19166574 Mass Air Flow Meter Mounting Boss
10367117 Accelerator Pedal Assembly
12581966 Oxygen Sensor (Qty 2 Per Kit)
15156588 Oxygen Sensor Mounting Boss (Qty 2 Per Kit)
19171935 Instruction Sheet
Thread Starter
Teching In
Joined: Mar 2008
Posts: 13
Likes: 0
From: 1000 Oaks Calif
Update! The kit won't work on my engine. It's for an LS2. I did find a guy that thinks he can fix my Delphi MEFI 4. He thinks it might have had a grounding issue. I sent it off to him to see if he can fix it.
