LS1TECH - Camaro and Firebird Forum Discussion
LS1-LS2-LS3-LS6-LS7 PERFORMANCE
PCM Diagnostics & Tuning
SES light on

PCM Diagnostics & Tuning HP Tuners | Holley | Diablo

SES light on

Reply Subscribe

Search this Thread

Old

Mar 17, 2009 | 01:29 AM

#1

Thread Starter

TECH Enthusiast

iTrader: (4)

Joined: Jan 2004

Posts: 544

Likes: 0

From: Fort Lauderdale, FL

Default

SES light on

my ses light is on also my low coolant light is on. ive replaced the coolant and did a flush of the system and its still staying on. Thermostat maybe? anyone? cars temp is low and never usually at the middle unless it gets really hot outside. Anyone?

Old

Mar 17, 2009 | 11:33 AM

#2

TECH Senior Member

iTrader: (7)

Joined: Dec 2001

Posts: 6,150

Likes: 7

From: Orlando

Default

those coolant sensors are junk, and most likely it just failed. Disconnect the sensor if you want the light to go off. (passenger side of radiator, mid way down)

(the SES light is unrelated to the coolant level sensor)

Ryan

Old

Mar 17, 2009 | 01:25 PM

#3

Thread Starter

TECH Enthusiast

iTrader: (4)

Joined: Jan 2004

Posts: 544

Likes: 0

From: Fort Lauderdale, FL

Default

so its not the thermostat? should i tape off the unplugged cable?

Old

Mar 17, 2009 | 01:34 PM

#4

TECH Senior Member

iTrader: (7)

Joined: Dec 2001

Posts: 6,150

Likes: 7

From: Orlando

Default

If your not seeing hot temps on the guage, I would assume it is the sensor. Most go bad before being 10 years old.

Ryan

Old

Mar 18, 2009 | 03:32 AM

#5

Thread Starter

TECH Enthusiast

iTrader: (4)

Joined: Jan 2004

Posts: 544

Likes: 0

From: Fort Lauderdale, FL

Default

unplugged it and light went off but not the ses

Old

Mar 18, 2009 | 03:38 AM

#6

12 Second Club

iTrader: (4)

Joined: Dec 2007

Posts: 1,712

Likes: 0

From: Between Bowling Green/Owensboro

Default

Have it scanned. Report back with code

Old

Mar 18, 2009 | 08:26 AM

#7

TECH Senior Member

iTrader: (7)

Joined: Dec 2001

Posts: 6,150

Likes: 7

From: Orlando

Default

the ses is unrelated, and you will need to get it checked/cleared.

Ryan

Reply Subscribe

First
Prev
1 / 1
Next
Last

All times are GMT -5. The time now is 12:15 PM.