60lb. high-imp Injector setup
60lb. high-imp Injector setup I used the spread sheet to figure out the flow rate. What should I set the minimum PW at? It's at the stock 3.9xx, and the car idles rich and won't pull fuel when I decrease the VE map. This is a 3-bar SD OS by the way. I've seen a few guys mention they reduce the PW to 1.4 or so and that helps.
It's a bolt-on LS1 for now(LS6 cam + 1.8 rockers). It's getting a big dry kit in the future, that's why we just left the 60 lb. injectors in it.
Unfortunately I won't be able to log with the wideband until the new output cord gets here(LM-1).
Any tips or tricks for tuning the 3-bar OS?
It's a bolt-on LS1 for now(LS6 cam + 1.8 rockers). It's getting a big dry kit in the future, that's why we just left the 60 lb. injectors in it.
Unfortunately I won't be able to log with the wideband until the new output cord gets here(LM-1).
Any tips or tricks for tuning the 3-bar OS?
