Shift points?
Thread Starter
TECH Enthusiast
iTrader: (21)
Joined: Jul 2006
Posts: 609
Likes: 0
From: Tellico Plains, TN
Shift points? Hey guys,
I've got my shift points set @ 6600, yet by my scans the car shows to be shifting @ 6300 + or - a few rpms. At the track with the shift points bumped to 6800, it still seems to be shifting around the same rpm. Is this a lag in the scanner or am I overlooking something? Here is the file and a quick log. Thanks for any help!
I've got my shift points set @ 6600, yet by my scans the car shows to be shifting @ 6300 + or - a few rpms. At the track with the shift points bumped to 6800, it still seems to be shifting around the same rpm. Is this a lag in the scanner or am I overlooking something? Here is the file and a quick log. Thanks for any help!
Last edited by RZRSEDGE; Jun 5, 2009 at 07:51 PM.
Probably shifting at MPH before it hits the RPM? Set the MPH higher. Just curious, are you running a cam... a stock cam runs out of power about 6000 rpm so you'll see no benefit from raising the settings?
set your MPH down to a single digit... It takes out one less variable, and now it will always be above that and simpley look for RPM to shift. Thats what I do and have no problems. Just make sure the REV limiter is a few hundred RPMs above that.
