LC1 to efi live question
#1
TECH Regular
Thread Starter
iTrader: (33)
Join Date: Feb 2003
Location: Illinois
Posts: 456
Likes: 0
Received 0 Likes
on
0 Posts
LC1 to efi live question
Im trying to input the values from the download section on EFILIVEs site into my LC1 to program it to work with efilive. Im using LMprogrammer 3.22 and on the site it shows version 3.06. Heres my problem.......I click on Analog 1 out, select use air fuel ratio then try to enter these values .883 volt at 10.00 AFR
4.21 volt at 20.00 AFR
It wont let me enter 10.00 or 20.00 for the AFR value. I keep getting an error message and this is what it says
AFR must be between 860.05 and 2619.71 and smaller than upper AFR limit.
What am I doing wrong? Since im using a newer version of the LM Programmer is there different values that I need to enter? I called Innovate and the Tech guy tells me it should work fine? Please help!!
4.21 volt at 20.00 AFR
It wont let me enter 10.00 or 20.00 for the AFR value. I keep getting an error message and this is what it says
AFR must be between 860.05 and 2619.71 and smaller than upper AFR limit.
What am I doing wrong? Since im using a newer version of the LM Programmer is there different values that I need to enter? I called Innovate and the Tech guy tells me it should work fine? Please help!!
#2
TECH Apprentice
iTrader: (24)
Join Date: Jul 2007
Location: Sumner, WA
Posts: 319
Likes: 0
Received 0 Likes
on
0 Posts
Sounds like you have the popular firmware corruption issue of the LC-1. You should update your firmware to v1.10 using LMProgrammer version 3.25. Then re-setup your voltage and AFR ranges.