Performabuilt transmission...What tuning needed on install?
Thread Starter
TECH Enthusiast
iTrader: (12)
Joined: Nov 2008
Posts: 590
Likes: 0
From: Long Island, NY
Performabuilt transmission...What tuning needed on install? When I install my performabuilt level 2 transmission and yank ss3200, which tuning would I need to do so it will work fine or any codes that should be deleted. Shift points will be raised to 6200. I won't be doing the tuning but would like to know what to tell vettedoctors what I want. I heard that I shouldn't change any of the pressure tables or smoething. Thanks.
Also after installing the transmission, torque converter, ls6 heads and cometic gaskets, would it be ok to drive the 25 miles there or should I get it towed there on a friends flatbed, I'm also going to get my 3.23s and truetrac installed by them before the tuning.
Also after installing the transmission, torque converter, ls6 heads and cometic gaskets, would it be ok to drive the 25 miles there or should I get it towed there on a friends flatbed, I'm also going to get my 3.23s and truetrac installed by them before the tuning.
Last edited by camz28arro; Oct 9, 2009 at 01:02 PM.
If you need to tell your tuner how to do his job, you may want to shop around. I would think that the Vette Drs are more than well enough versed to do what is needed; they won't/don't need to be told what to do.
