trans pressure?
Thread Starter
11 Second Truck Club
iTrader: (2)
Joined: Jan 2002
Posts: 1,412
Likes: 0
From: Missouri
trans pressure? If the trans pressure has been raised by turning the screw on the PCS sol. can that be negated by changing the numbers in the pressure table in edit? I have a used tranny that I know nothing about except it was supposedly rebuilt and "beefed up" about 4000 miles ago. I drove the truck before I took it out and it would bark 1-2 and 2-3 with the stock 5.3 engine. It shifts too hard under normal driving so I figure someone may have jacked with the PCS and I would rather not pull the pan if I don't have to but I want to soften it up a little.
