Please help...ses codes
Thread Starter
Joined: Apr 2003
Posts: 652
Likes: 0
From: Deer Park (Houston),Tx
Please help...ses codes p1153- bank 2 fuel control shifted lean
p1133- HO2S insufficient switching sensor 1 / bank 1 fuel control shifted lean (FAOSC)
and
P0155- PCM determined that there is a malfunction in the heater circuit for O2 sensor 1 in bank 2 (replaced)
What can I do to fix the 2 highlighted? Even though I replace the O2 sensor will the code clear once the others are fixed or do I have to get them cleared?
Thank You
Jason
p1133- HO2S insufficient switching sensor 1 / bank 1 fuel control shifted lean (FAOSC)
and
P0155- PCM determined that there is a malfunction in the heater circuit for O2 sensor 1 in bank 2 (replaced)
What can I do to fix the 2 highlighted? Even though I replace the O2 sensor will the code clear once the others are fixed or do I have to get them cleared?
Thank You
Jason
Teching In
Joined: Dec 2001
Posts: 387
Likes: 0
From: Southern IN, USA
Sorry I haven't been on the board lately and I am at school so I don't have my manuals...
Don't worry about "clearing" the codes, till the problem is solved. Do tell us what (if any) mods, mileage, maintenance and any other information that can assist in diagnosing problem.
I MAY be back on in a few hours at home with my manuals, do look at my list of links on my page (in my sig) for other boards that you can search, and DO try www.google.com and enter the "P" codes - there are a number of sites out there that may be able to provide pointers - but again without knowing more about your car I won't even suggest ideas - Fuel and Emission codes are REALLY strange if there are ANY mods, and on a stock car, uv unknown mileage, I would look at air, fuel and ignition (yea I know that is about EVERYTHING) items, for damage, defects or debris as a starter.
let us know!
Don't worry about "clearing" the codes, till the problem is solved. Do tell us what (if any) mods, mileage, maintenance and any other information that can assist in diagnosing problem.
I MAY be back on in a few hours at home with my manuals, do look at my list of links on my page (in my sig) for other boards that you can search, and DO try www.google.com and enter the "P" codes - there are a number of sites out there that may be able to provide pointers - but again without knowing more about your car I won't even suggest ideas - Fuel and Emission codes are REALLY strange if there are ANY mods, and on a stock car, uv unknown mileage, I would look at air, fuel and ignition (yea I know that is about EVERYTHING) items, for damage, defects or debris as a starter.
let us know!
Thread Starter
Joined: Apr 2003
Posts: 652
Likes: 0
From: Deer Park (Houston),Tx
emarkay and JMWS6 - Thanks for the response. I have done a few mods to my car and have put about 6000 miles on the car scince the last mod. Here are the mods as follows:
1. Hooker Lt's
2. Hooker ORY pipe w/O2 sims
3. Yank SS3600
4. MTI C1 cam (222/222-.566/.566-112) w/comp 918's
5. ASP pulley
6. custom tuning
The car has 17,700 miles. The car is not my daily driver and I have not performed any serious maint. on the car. The car is burning oil but I have not done anthing to fix it yet because I just noticed on the last oil change. Hope this helped out.
Thank you
Jason
1. Hooker Lt's
2. Hooker ORY pipe w/O2 sims
3. Yank SS3600
4. MTI C1 cam (222/222-.566/.566-112) w/comp 918's
5. ASP pulley
6. custom tuning
The car has 17,700 miles. The car is not my daily driver and I have not performed any serious maint. on the car. The car is burning oil but I have not done anthing to fix it yet because I just noticed on the last oil change. Hope this helped out.
Thank you
Jason
Last edited by Carbon; Dec 26, 2003 at 03:13 AM.
