lc1 wiring
Thread Starter
TECH Addict
iTrader: (41)
Joined: Feb 2007
Posts: 2,005
Likes: 2
From: Battlecreek, MI / Mansfield, OH
lc1 wiring ok i have a 01 trans am, so no egr, is the only other place to hook up the lc1 on the a/c prussure? tryin to get it hooked up so it will read on my hpt.i did a search to by the way.
Thread Starter
TECH Addict
iTrader: (41)
Joined: Feb 2007
Posts: 2,005
Likes: 2
From: Battlecreek, MI / Mansfield, OH
ok so i guess i didnt search hard enough. so there are still provisions for a egr on the computer. just gotta run the wires.
Blue Connector:
Pin 41, EGR Pintle Position Ground
Pin 47, EGR Pintle Position Sensor 5V Reference (constant 5V)
Pin 55, EGR Pintle Position Sensor Signal (WBO2)
is this the correct pins?
Blue Connector:
Pin 41, EGR Pintle Position Ground
Pin 47, EGR Pintle Position Sensor 5V Reference (constant 5V)
Pin 55, EGR Pintle Position Sensor Signal (WBO2)
is this the correct pins?
10 Second Club
Joined: Aug 2005
Posts: 567
Likes: 0
From: Tennessee Tech
I tried getting mine to work today... I think you posted up in my old thread... I had it running from the 55 Pin and couldn't get any kind of signal, so tried 47 and couldn't get it to work either. I don't have the instructions to it anymore but found a wiring diagram online to see which output went from the wb to the pcm, and it said the brown, couldn't get that or the yellow output to work... What am i doing wrong!?
10 Second Club
Joined: Aug 2005
Posts: 567
Likes: 0
From: Tennessee Tech
I figured it out man... Used pin 55 and got a 5V reading in hptuners after I enabled EGR in the tune, then made a custom PID for LC1 AFR with the function that everyone said to use and it worked like a charm, pm me if you need any help with it.
Thread Starter
TECH Addict
iTrader: (41)
Joined: Feb 2007
Posts: 2,005
Likes: 2
From: Battlecreek, MI / Mansfield, OH
ahhhhh!!! well im gonna be putting this off for a week or 2. I was on my way to get the bung welded in this morning, and i hit a curb/guard rail. So now i need a new rim, fender and bumper. Its not horrible but im not gonna drive the car with the rim the way it is. DAMN! i was so excited about gettin it installed too. now i gotta fork out $500 for the deductable.
