Do I need a new PCM? or is this fixable
[/IMG] 
If its a blue / Red connectored PCM, yes you need to replace it, since I see pins # 48, 51 and 61 missing, all 3 pins are used on both connectors, so you have no choice in the mater, since no mater which plug it is, you need those pins
Don't know how it happened, but my car all the sudden wouldn't start and it threw the code p0335 which is crank sensor circuit malfunction. So I replaced the crank sensor and of course it didn't start. So I finally found this and I'm guessing it's the problem. Now I need to fix it. I know I need a new pcm, but this is my other problem.
[IMG]
[/IMG]
I already popped the blue thing off and cleaned it but these terminal things
have the pin stuck inside, I was able to pull one pin out cleanly then I tried to drill one out, but it didn't work.
I found this pic here http://www.eficonnection.com/eficonnection/100w.aspx but there is no way to buy them. So anybody know where I can get these little terminals. I'm pretty sure you guys are gonna say a junk yard.
[IMG]
[/IMG]I already popped the blue thing off and cleaned it but these terminal things
have the pin stuck inside, I was able to pull one pin out cleanly then I tried to drill one out, but it didn't work.
I found this pic here http://www.eficonnection.com/eficonnection/100w.aspx but there is no way to buy them. So anybody know where I can get these little terminals. I'm pretty sure you guys are gonna say a junk yard.
