Stock pcm help
Stock pcm help Can i use a stock pcm , i have a 02 lq9 motor and harness , i don't have a pcm which one would be best for me to use , the motor has a 88mm turbo and 95# inj. or should i just buy aftermarket
How do you tune a stock pcm do you us a laptop ??
I'm new to the efi , i always have had carbs
How do you tune a stock pcm do you us a laptop ??
I'm new to the efi , i always have had carbs
You can use a stock PCM - personally, I would, along with a 2 or 3 bar custom operating system... Yes, they are tuned with a laptop using a tuning software like EFILive or HPTuners. The best PCM to use is a #0411.
How much boost are you running? What kind of injectors are they? What is it going in and what kind of transmission?
How much boost are you running? What kind of injectors are they? What is it going in and what kind of transmission?
You can use a stock PCM - personally, I would, along with a 2 or 3 bar custom operating system... Yes, they are tuned with a laptop using a tuning software like EFILive or HPTuners. The best PCM to use is a #0411.
How much boost are you running? What kind of injectors are they? What is it going in and what kind of transmission?
How much boost are you running? What kind of injectors are they? What is it going in and what kind of transmission?
1987 Mustang notch , boost will be 10-15 pounds , 95# Delphi injectors , powerglide trans
Do you have pix and more info on which on to use of these... 2 or 3 bar custom operating system
Thanks for your info
The 2 bar operating system is put into the PCM using the tuning software - and you use a 2 bar MAP sensor and then you can fuel it accurately in Speed Density without a Mass Airflow Sensor. Those injectors may be a bit hard to tune on idle - are they high or low impedence?
The 2 bar operating system is put into the PCM using the tuning software - and you use a 2 bar MAP sensor and then you can fuel it accurately in Speed Density without a Mass Airflow Sensor. Those injectors may be a bit hard to tune on idle - are they high or low impedence?
Trending Topics
We have them in stock they are $75 set up to a stock custom os5. Shipping would be about 20 bucks.
You would need V1 hardware, I have a used one laying round for 400 if you want one.
You would need V1 hardware, I have a used one laying round for 400 if you want one.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
